Makita HS7100, HS7101 specifications Angular Guide

P 7/16

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-4. Angular Guide

DISASSEMBLING

Angular guide can be disassembled as described in Fig. 6.

Fig. 6

1.Loosen M6x20 Hex bolt with Lever 45, then remove E-8 Bow stop ring.

2.Remove M6x20 Hex bolt by using Lever 45 as a tool, then remove Flat washer 6.

3.Loosen M6x8 Hex socket head set crew, then remove Shoulder pin 6-7 that functions as a hinge.

Lever 45		M6x8 Hex socket
E-8 Bow stop ring	Flat washer 6
	Lever 45	Shoulder pin 6-7 set screw
M6x20 Hex bolt
	M6x20 Hex bolt
4. Hold M5-8 Hex lock nut with Wrench 8,		5. Disassemble Angular guide.
then unscrew M5 Truss head screw

O ring 9 and Stopper can now be removed. Angular guide

O Ring 9

M5 Truss head screw

Stopper	M5-8
Angular guide	Hex lock nut

ASSEMBLING

Assemble Angular guide by taking the reverse step of Disassembling. (Fig. 6)

Note:

1.E-8 Bow stop ring must be mounted as shown on the left in Fig. 2A.

2.Adjust Lever 45 as shown on the right in Fig. 2A.