Concave side | Makita 6413, M611, 6412, 6411 instruction

P 6/12

Do the reverse of the disassembling steps.

Note:

Leaf spring is not reversible when assembled

to Housing (L). The concave side must face towards Ball bearing 627ZZ on Armature. (Fig. 15)

Fig. 15

Image 6

Contents

Specification Optional accessoriesStandard equipment Repair Helical gear Drill Chuck See Fig Gear Section Motor Section Concave side Circuit diagram Machines Without Choke Coil and Noise Suppressor Wiring diagram See Connecting Lead wire to Brush holderMachines Without Choke Coil Machines With Choke Coil Fig. D-3 Choke coil With purple Lead wires Fig. D-4 Fig. D-5 Field See Connecting Lead wire to Brush holder Brush holder See Connecting Lead wire to Brush holderChoke coil With purple Lead wires if used Noise suppressor if used Power supply cord