VACUUM CLEANER SAFETY

WARNINGSENB119-3

WARNING! IMPORTANT READ CAREFULLY all safety warnings and all instructions BEFORE USE. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

1.Before use, make sure that this cleaner must be used by people who have been adequately instructed on the use of this cleaner.

2.Only use the socket outlet on the cleaner for purposes specified in the instructions.

3.If liquid escapes from the cleaner, switch off immediately.

4.Clean the water level limiting device regularly and examine it for signs of damage.

5.Do not use the cleaner without the filter. Replace a damaged filter immediately.

6.USE OF EXTENSION CORD. When using an extension cord because of the great distance to your power source, try to employ a cord that is sufficiently thick but not too long, or cleaner performance will be adversely affected. For outdoor applications use an extension cord suitable for outdoor use.

7.VOLTAGE WARNING: Before connecting the cleaner to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the cleaner. A power source with voltage greater than that specified for the cleaner can result in SERIOUS INJURY to the operator as well as damage to the cleaner. If in doubt, DO NOT PLUG IN THE CLEANER. Using a power source with voltage less than the nameplate rating is harmful to the motor.

8.AVOID UNINTENTIONAL STARTING. Be sure switch is OFF when plugging in.

9.Do not attempt to pick up flammable materials, fire works, lighted cigarettes, hot ashes, hot metal chips, sharp materials such as razors, needles, broken glass or the like.

10.NEVER USE THE CLEANER IN THE VICINITY OF GASOLINE, GAS, PAINT, ADHESIVES OR OTHER HIGHLY EXPLOSIVE SUBSTANCES. The switch emits sparks when turned ON and OFF. And so does the motor commutator during operation. A dangerous explosion may result.

11.Never vacuum up toxic, carcinogenic, combustible or other hazardous materials such as asbestos, arsenic, barium, beryllium, lead, pesticides, or other health endangering materials.

12.Never use the cleaner outdoors in the rain.

13.Do not use close to heat sources (stoves, etc.).

14.GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.

15.Do not block cooling vents. These vents permit cooling of the motor. Blockage should be carefully avoided otherwise the motor will burn out from lack of ventilation.

16.Keep proper footing and balance at all times.

17.DO NOT ABUSE CORD. Never carry the cleaner by cord or yank it to disconnect from receptacle. Keep cord away from heat, oil, and sharp edges.

18.Do not fold, tug or step on the hose.

19.Stop the cleaner immediately if you notice poor performance or anything abnormal during operation.

20.DISCONNECT THE CLEANER. When not in use, before servicing, and when changing accessories.

21.Clean and service the cleaner immediately after each use to keep it in tiptop operating condition.

22.MAINTAIN THE CLEANER WITH CARE. Keep the cleaner clean for better and safer performance. Follow instructions for changing accessories.

Inspect cleaner cords periodically and if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.

23.CHECK DAMAGED PARTS. Before further use of the cleaner, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by authorized service center. Don’t use the cleaner if switch does not turn it on and off.

24.REPLACEMENT PARTS. When servicing, use only identical replacement parts.

25.STORE IDLE CLEANER. When not in use, the cleaner should be stored indoors.

26.Be kind to your cleaner. Rough handling can cause breakage of even the most sturdily built cleaner.

27.Do not attempt to clean the exterior or interior with benzine, thinner or cleaning chemicals. Cracks and discoloration may be caused.

28.Do not use cleaner in an enclosed space where flammable, explosive or toxic vapors are given off by oil-base paint, paint-thinner, gasoline, some mothproofing substances, etc., or in areas where flammable dust is present.

29.Do not leave the cleaner cord lying on the floor after you have finished a cleaning job. It can become a tripping hazard or may cause damage to the cleaner.

30.Do not operate this or any tool while under the influence of drugs or alcohol.

31.As a basic rule of safety, use safety goggles or safety glasses with side shields.

32.Use a dust mask in dusty work conditions.

33.The cleaner is not intended for use by young children or infirm persons without supervision.

34.Young children should be supervised to ensure that they do not play with the cleaner.

35.Never handle plug cord or cleaner with wet hands.

36.Use extreme caution when cleaning on stairs.

9

Page 9
Image 9
Makita VC2510L, VC3210L, VC1310L instruction manual Vacuum Cleaner Safety

VC1310L, VC3210L, VC2510L specifications

Makita has long been a renowned name in power tools, and their line of vacuum cleaners is no exception. The VC2510L, VC1310L, and VC3210L models are versatile and powerful, designed to meet the demands of both professional and DIY users. These vacuum cleaners are engineered to provide superior dust extraction and cleaning capabilities, making them an essential addition to any workshop or job site.

The Makita VC2510L is a compact yet powerful wet and dry vacuum cleaner. It features a robust 25-liter tank, which provides ample capacity for various applications. One of its standout features is the automatic filter cleaning system that maintains optimal suction performance while prolonging the life of the filter. The VC2510L also boasts a dual motor system that ensures consistent and powerful suction, even with heavy debris. The vacuum is equipped with HEPA filters, ensuring that even the smallest particles are captured, making it an excellent choice for users requiring clean air environments. Its lightweight design and durable casters add to its portability and ease of use.

The VC1310L is another strong contender in the Makita vacuum lineup. With a slightly smaller 12-liter capacity, it is ideal for lighter-duty tasks while still providing excellent performance. This model features an innovative auto-stop feature that automatically stops the motor when the tank is full, preventing overflow and ensuring efficient operation. The VC1310L is equipped with a powerful motor that delivers exceptional suction power, as well as a compact design that allows for easy storage and transport. Its washable and replaceable filters offer convenience and cost savings in maintenance.

Lastly, the VC3210L frees users from the limitations of traditional vacuums. With a generous 32-liter capacity, this model is designed for larger projects and increased debris collection. Its heavy-duty construction includes a reinforced tank, making it suitable for demanding environments. The VC3210L features an advanced filtration system that combines a disposable paper filter and a HEPA filter for thorough dust filtration. Additionally, it comes with a range of accessories, including various nozzle attachments, making it versatile for different cleaning tasks.

In summary, the Makita VC2510L, VC1310L, and VC3210L vacuum cleaners deliver performance and efficiency tailored to various user needs. Their features, such as automatic filter cleaning, auto-stop functionality, and robust construction, reflect Makita's commitment to quality and innovation in power tools. Whether for professional use or home projects, these vacuum models provide reliable solutions for efficient dust and debris management.