Marantz CR601 manual Tuner Operation, Listening To Fm/Am, 7FM Auto preset memory, 7Default value

TUNER OPERATION

8. Either turn the Easy JOG 4/¢ knob !5or

press the 1 button ⁄1or ¡ button ⁄2.

• Automatic searching begins, then stops when

7. Press the Easy JOG 4/¢ knob !5or ENTER

button b to set the manual tuning mode.

LISTENING TO FM/AM

7FM Auto preset memory

1.Press the POWER ON/STANDBY switch q or

button z to turn on the power.

2.Watching the display, press the INPUT button i or . or FM button ⁄9to select the FM band.

7Default value

Auto tuner presets

A1 ~ A10	87.5	/ 89.1	/ 98.1	/ 108 / 90.1 / 90.1 /
	90.1	/ 90.1	/ 90.1	/ 90.1 MHz
B1 ~ B10	522 / 603 /		999 / 1404 / 1611 kHz,
	90.1	/ 90.1	/ 90.1	/ 90.1 / 90.1 MHz
C1 ~ C10	90.1 MHz
D1 ~ D10	90.1 MHz

a station tuned in.

STEREO receive mode

TUNED mode

AUTO TUNING mode

Notes

•When in the auto tuning mode on the FM band,

the display on the panel when the stereo

8. Either turn the Easy JOG 4/¢ knob !5or

press the 1 button ⁄1or ¡ button ⁄2to tune

in the desired station.

• The frequency changes continuously when

the 1 button ⁄1or ¡ button ⁄2on the

remote control unit is held in.

!5	i u
	CD RECEIVER CR601

ENGLISH

3.	Press the AUTO TUNE button ⁄4.
4.
	Press the ENTER button b.
	• The unit automatically begins searching for
	FM broadcast stations.

7Auto tuning (FM/AM)

1.	Press the POWER ON/STANDBY switch q or
		button z to turn on the power.
2.	Watching the display, press the INPUT button
	i or . or FM button ⁄9or AM button ¤1to
	select the desired band (AM or FM).

broadcast is tuned in. At open frequencies, the

noise is muted and the tuned off.

•If the signal is weak, if may be difficult to tune into the station in stereo. In such a case, press the MODE button , on the remote control. FM stereo broadcasts are received in monaural and

the is not illuminated. To return to stereo mode, press the MODE button , on the remote control again.

•If tuning does not stop at the desired station. Use “Manual tuning” operation.

	INPUT	MENU	DIRECT
BASS	TREBLE
PUSH TO ENTER		VOLUME
	STANDBY
	POWER ON / STANDBY		PHONES

q

• When the first FM broadcast station is found,

that station is stored in the preset memory at

channel A1.

• Subsequent stations are automatically stored

in order at preset channels A1 to A10, B1 to

B10, C1 to C10, D1 to D10 for a maximum of

40 stations.

• Channel A1 is tuned in after the auto preset

memory operation is completed.

Note

•If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.

•To interrupt this function, press the POWER

ON/STANDBY switch q or button z.

•Perform this operation from the remote control unit.

3.	Press the MENU button u or n to select
	menu.
4.	Either turn the Easy JOG 4/¢ knob !5or
	press the 5 or ∞ button c to select “Search
	Mode”.
5.
	Press the Easy JOG 4/¢ knob !5or
	ENTER button b to set search mode.
6.	Either turn the Easy JOG 4/¢ knob !5or
	press the 5 or ∞ button c to select “Auto”.
7.
	Press the Easy JOG 4/¢ knob !5or
	ENTER button b to set the auto tuning mode.

7Manual tuning (FM/AM)

1.Press the POWER ON/STANDBY switch q or

button z to turn on the power.

2.Watching the display, press the INPUT button i or . or FM button ⁄9or AM button ¤1to select the desired band (AM or FM).

3.Press the MENU button u or n to select menu.

4.Either turn the Easy JOG 4/¢ knob !5or press the 5 or ∞ button c to select “Search Mode”.

5.Press the Easy JOG 4/¢ knob !5or ENTER button b to set search mode.

6.Either turn the Easy JOG 4/¢ knob !5or press the 5 or ∞ button c to select “Manual”.

z

c

b

n

,

.

⁄1

⁄2

⁄4

			CLOCK
			CALL
TIMER	1	2
			3
	4	5	6
	7	8	9
	--/---
ENTER		10/0	CLEAR
MENU			DISPLAY
	VOL
INPUT	MUTE		INPUT
MODE			REPEAT
	VOL
TUNING		PRESET
DIMM	DAB	FM	AM
AUTO TUNE	SLEEP	SHIFT	DIRECT
MEMO

REMOTE CONTROLLER

RC601CR

¤1

⁄9

15