7 Loading batteries
| Before using the supplied remote control unit for | |
ENGLISH | the first time, load the batteries in the remote | |
control unit. The batteries provided are used to | ||
| ||
| verify the operations of the remote control unit only. | |
| 1. Take hold of the tab on the battery cover which | |
| is found on the back side of the remote control | |
| unit, and pull it up. |
2.Take load the two new size “AAA” batteries inside the battery compartment while taking care to align their polarities correctly with the polarity markings (ª with ª and · with ·).
Size “AAA”
3.Push the battery cover down in the direction of the arrow to close it.
Notes on batteries:
•Replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the set. (The included battery is only for verifying operation.)
•To prevent damage or leakage of battery fluid:
–Do not use a new battery together with an old one.
–Do not use two different types of batteries.
–Do not
•If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
7Operating range of the remote control unit
•Point the remote control unit at the remote sensor on the main unit as shown on the diagram.
•The remote control unit can be used from a straight distance of approximately 5 meters from the main unit, but this distance will be shorter if there are obstacles in the way or if the remote control unit is not pointed directly at the remote sensor.
•The remote control unit can be operated at a horizontal angle of up to 30 degrees with respect to the remote sensor.
Notes
•It may be difficult to operate the remote control unit if the remote sensor is exposed to direct sunlight or strong artificial light.
•Do not press buttons on the main unit and remote control unit simultaneously. Doing so may result in malfunction.
•Neon signs or other devices emitting
Approx. 5m
RC601CR
4