SPECIFICATIONS & DIMENSIONAL DRAWINGS
Band III (174 to 240 MHz)
Frequency | Level | Frequency | Level |
174.928 MHz | 5A | 208.064 MHz | 9D |
Frequency | Level | Frequency | Level |
1452.960 MHz | LA | 1473.504 MHz | LM |
AMP |
|
|
Power Output | 30 W + 30 W (6 Ω THD=10%) | |
THD (Total Harmonic Distortion) |
| |
............................ | 0.22% (15 W output 6 Ω) | |
Input Sensitivity and Impedance | 200 mV | |
Frequency Response |
| |
....................... | 20 | |
Tone Control | +8 dB, | |
Speaker Impedance | ||
FM |
|
|
Tuning Frequency Range |
| |
........................ | ||
Usable Sensitivity | ....................... | 2.2 µV (75ΩIHF) |
S/N Ratio | Stereo 68 dB | |
.................................... | Mono 69 dB | |
THD (Total Harmonic Distortion) |
| |
................................... | Stereo 0.3% (1 kHz) | |
..................................... | Mono 0.2% (1 kHz) | |
Frequency Response |
| |
.................30 |
CD |
|
|
Frequency Response | 20 | |
Audio Dynamic Range | 93 dB | |
THD (Total Harmonic Distortion) | ................0.01% | |
Wow and Flutter |
|
|
................Below threshold of measurability | ||
Audio Output/Impedance (Analog) | ||
........................................ | 1.3 V (rms) /1 kΩ | |
S/N Ratio | 93 dB | |
General |
|
|
Power Supply | AC 230V, 50 Hz | |
Power Consumption | 74 W | |
0.8 W | ||
Dimensions (W x H x D) |
|
|
........................210 W x 146 H x 336 D mm | ||
Weight | 5.7 kg |
*Specifications subject to change without prior notice.
176.640 MHz | 5B | 209.936 MHz | 10A |
178.352 MHz | 5C | 211.648 MHz | 10B |
180.064 MHz | 5D | 213.360 MHz | 10C |
181.936 MHz | 6A | 215.072 MHz | 10D |
183.648 MHz | 6B | 216.928 MHz | 11A |
185.360 MHz | 6C | 218.640 MHz | 11B |
187.072 MHz | 6D | 220.352 MHz | 11C |
188.928 MHz | 7A | 222.064 MHz | 11D |
190.640 MHz | 7B | 223.936 MHz | 12A |
192.352 MHz | 7C | 225.648 MHz | 12B |
194.064 MHz | 7D | 227.360 MHz | 12C |
195.936 MHz | 8A | 229.072 MHz | 12D |
197.648 MHz | 8B | 230.784 MHz | 13A |
199.360 MHz | 8C | 232.496 MHz | 13B |
201.072 MHz | 8D | 234.208 MHz | 13C |
202.928 MHz | 9A | 235.776 MHz | 13D |
204.640 MHz | 9B | 237.488 MHz | 13E |
206.352 MHz | 9C | 239.200 MHz | 13F |
1454.672 MHz | LB | 1475.216 MHz | LN |
1456.384 MHz | LC | 1476.928 MHz | LO |
1458.096 MHz | LD | 1478.640 MHz | LP |
1459.808 MHz | LE | 1480.352 MHz | LQ |
1461.520 MHz | LF | 1482.064 MHz | LR |
1463.232 MHz | LG | 1483.776 MHz | LS |
1464.944 MHz | LH | 1485.488 MHz | LT |
1466.656 MHz | LI | 1487.200 MHz | LU |
1468.368 MHz | LJ | 1488.912 MHz | LV |
1470.080 MHz | LK | 1490.624 MHz | LW |
1471.792 MHz | LL |
|
|
ENGLISH
Stereo Separation | 40 dB (1 kHz) | |
AM |
|
|
Tuning Frequency Range |
|
|
........................... | ||
Usable Sensitivity | 320 µV | |
S/N Ratio | 45 dB | |
THD (Total Harmonic Distortion) | ................1.00% | |
DAB |
|
|
Tuning Frequency Range |
|
|
Frequency Response | 42 | |
THD (Total Harmonic Distortion) | ................0.06% |
| 336 |
|
12 | 312 | 12 |
210
CD RECEIVER CR601
| INPUT | MENU | DIRECT |
|
BASS | TREBLE |
| 141 | 146 |
PUSH TO ENTER |
| VOLUME | ||
| STANDBY |
|
|
|
| POWER ON / STANDBY |
| PHONES |
|
|
|
| 5 |
|
(mm)
OTHERS
The section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz equipment.
7Cleaning of equipment external surfaces
The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft,
If the equipment becomes heavily soiled:
•dilute some washing up liquid in water, in a ratio of one part detergent to six parts water.
• dip a soft,
•wipe the equipment with the damp cloth.
•dry the equipment by wiping it with a dry cloth.
7Repairs
Only the most competent and qualified service technicians should be allowed to service the factory- trained warranty station personnel have the knowledge and special facilities needed for repair and calibration of this precision equipment. After the warranty period has expired, repairs will be performed for a charge if the equipment can be returned to normal operation.
In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. If writing, please include the model and serial number of the equipment together with a full description of what you think is abnormal about the equipment's behaviour.
29