Marantz R3001 manual English, Bass Mix, Surround setting group, Ht-Eq, Lfe Level, Srsurr-Mode

3. PREFERENCE

1. 4.				3. 4.							2. 4.
D RECEIVER SR3001
	DISP	MULTI	AUTO	TUNED	ST	V – OFF NIGHT PEAK	ATT	ANALOG	SURROUND
	SLEEP	AUTO SURR		DIRECT	DISC 6.1 MTX 6.1		EQ	DIGITAL	DIGITAL
									L	R
								AAC PCM
											DO
SURROUND	PURE		SIMPLE
MODE	DIRECT		SETUP					DISPLAY		MEMORY	CLEAR
EAKER
						ENTER
AUTO	HT-EQ		MENU					EXIT		BAND	T-MODE
ES
3. 4.			TV					MAIN
		VOL.		SLEEP		MUTE		VOL.

5. When you select “TO MAIN MENU” by pressing the 3 or 4 button, you can return the SETUP MENU by pressing the ENTER button.

Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the

SETUP MENU.

BASS MIX

• The bass mix setting is only valid when “LARGE” is

set for the front speakers and “YES” is set for the

subwoofer at stereo playback .

• When the “BOTH” is selected, the low frequency

signal range of “LARGE” are produced

simultaneously from those channels and the

subwoofer channel.

4. SURROUND

This sub menu is to adjust channel levels for each surround setting groups. There are three surround setting groups shown below. Therefore if settings for a surround mode are changed, settings for all other surround modes in the same group are also changed.

Surround setting group

1 : AUTO, DOLBY, DTS, EX/ES, VIRTUAL, STEREO

2 : Multi-ch stereo

3 : CS II

1. 3. 5. 4. 5. 2. 5.

HT-EQ :

Select to active the HT-EQ with the 1 or 2 cursor buttons.

The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments.

Activating the HT-EQ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance.

The HT-EQ feature can be activated only while in Dolby Pro Logic Mode, or while decoding Dolby Digital or DTS encoded material.

LFE LEVEL :

Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal.

ENGLISH

OSDMENU

1. 4. ENTER

SET UP/	MENU OFF	2. 4.
T.TONE
PURE DIRECT AUTO	DTS

1. Select “3. PREFERENCE” in SETUP MENU with 3 or 4 cursor button.

2. Press the ENTER button.

When actual low frequency sound volume is weak

depending on room size, use this function to fill low

frequency sound equally in the room.

• When “Mix” is selected, subwoofer output is

determined depending on the speaker sizes for

each channels. If the front speaker size is set to

“Large”, subwoofer output is only the LFE signal

contained in Dolby Digital or DTS processed

signals.

D RECEIVER SR3001

EAKER

ES

DISP

MULTI

AUTO

TUNED

ST V – OFF

NIGHT

PEAK

ATT

ANALOG

SURROUND

SLEEP

AUTO SURR

DIRECT

DISC 6.1

MTX 6.1

EQ

DIGITAL

DIGITAL

L

R

AAC PCM

DO

SURROUND

PURE

SIMPLE

MODE

DIRECT

SETUP

DISPLAY

MEMORY

CLEAR

ENTER

AUTO

HT-EQ

MENU

EXIT

BAND

T-MODE

Select 0 dB, -10 dB or OFF with the 1 or 2 cursor buttons.

When you select “TO MAIN MENU” by pressing the 3 or 4 button, you can return the SETUP MAIN MENU by pressing the ENTER button.

MENU STRUCTURE of SURROUND setup

4.SURROUND

3. Press 3 or 4 cursor button to select desired item.

4. Press 1 or 2 cursor button to set the mode.

MENU STRUCTURE of PREFERENCE setup

Note:

When Front speaker is set ”SMALL”, then BASS MIX is set “MIX”. (The display appears “BASS MIX

=✱✱✱”.)

4. 5.	TV		MAIN
	VOL.	SLEEP	MUTE VOL.
	OSD		MENU
1. 3. 5.		ENTER
	SET UP/		MENU OFF	2. 5.
	T.TONE
	PURE DIRECT	AUTO	DTS

SURROUND MODE

HT-EQ

LFE

TO MAIN MENU EXIT

3.PREFERENCE STBY

BASS

NOMAL

ECONOMY

BOTH

MIX

***

The low frequency signal range of front L/R are outputted to a subwoofer simultaneously with the LFE signal.

For L&R is "SMALL" :

The low frequency signal range of front L/R are outputted to a subwoofer simultaneously with the LFE signal.

For L&R is "LARGE" :

The low frequency signal range of front L/R are not output to subwoofer.

This menu (BASS) will not be displayed, if SUBW is set "NONE".

1. Select “4. SURROUND” in SETUP MENU with

3 or 4 cursor button.

2. Press the ENTER button.

3. To select a desired item, press 3 or 4 cursor button.

4. Using the 1 or 2 cursor button to select the mode or adjust the volume level of each speaker.

5. When you select “TO MAIN MENU” by pressing the 3 or 4 button, you can return the SETUP MENU by pressing the ENTER button.

Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the

SETUP MENU.

exit SETUP

MENU

	7.1-V		LAST>TV>DVD>…>V-OFF>
TO MAIN MENU			EXIT
		exit SETUP MENU

STANDBY MODE:

When this function is set to "ECONOMY", you can reduce the power consumption when the unit is in the standby mode.

SR(SURR-MODE) :

Select the desired surround mode with 1 or 2 cursor button.

•If one of the following modes is selected, all other modes are also set to the same. AUTO, DOLBY, DTS, EX/ES, VIRTUAL, STEREO.

21