Marantz R3001 manual FL Display, Pcm

@2 HEADPHONE jack for stereo headphones

This jack may be used to listen to the SR3001’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4" stereo phono plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.

Notes:

•When using headphones, the surround mode will change to STEREO and TruSurround (TS) headphones by SURROUND MODE button.

•The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack.

FL DISPLAY

s

d

g

j l ¡1 ¡3

a

f

h

k

¡0

¡2

¡4

SURROUND

DISP

AUTO

TUNED

ST

V – OFF

NIGHT

PEAK

ATT ANALOG

DIGITAL

DIGITAL

¡7 SLEEP

AUTO SURR

DIRECT

DISC 6.1 MTX 6.1

SPKR

B

EQ

L

C

R

PCM

LFE

SL

S

SR

¡6

¡8

¡5

a DISP (Display Off) indicator

j

NIGHT mode indicator

This indicator is illuminated when the SR3001 is in

This indicator is illuminated when the SR3001 is in

the display off condition.

the Night mode, which reduces the dynamic range of

digital program material at low volume levels.

s SLEEP timer indicator

This indicator is illuminated when the sleep timer	k SPKR (Speaker) B indicator
function is active.	This indicator is illuminated when the S(Surround)
	speaker B system is active.

¡4 SIGNAL FORMAT indicators

2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,

PCM

When the selected input is a digital source, some of these indicators will be illuminated to display the specific type of signal in use.

¡5 ENCODED CHANNEL STATUS indicators

These indicators display the channels that are encoded with a digital

input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will be illuminated. If the digital input signal is 2 channel PCM-audio, “L” and “R” will be displayed.

If Dolby Digital 5.1ch signal with Surround EX flag or DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S” , “SR” and “LFE” will be illuminated.

¡6 Main Information Display

This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of unit’s operation.

ENGLISH

dAUTO SURR (Auto Surround mode) indicator

This indicator is illuminated to show that the AUTO SURROUND mode is in use.

fTUNER’s indicators

AUTO : This indicator illuminates when the

tuner’s Auto mode is in use. TUNED : This indicator illuminates when

a station is being received with sufficient signal strength to provide acceptable listening quality.

ST(Stereo) : This indicator illuminates when an FM station is being tuned into stereo condition.

lPEAK indicator

This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will illuminate. If this happens, you should press the ATT button on the front panel or the remote.

¡0 EQ mode indicator

This indicator is illuminated when the HT-EQ function is active.

¡1 ATT (Attenuation) indicator

This indicator is illuminated when the attenuation function is active.

¡7 DIRECT (Pure direct) indicator

This indicator is illuminated when the SR3001 is in the PURE DIRECT mode.

¡8 HDCD indicator

When HDCD signal is decoded from digital input, this indicator will light up.

g DTS-ES mode indicators		¡2 DIGITAL Input Indicator
	(DISC6.1, MTX6.1)
		This indicator lights when a digital input has been
These indicators will illuminate to show the DTS-ES
		selected.
decoding mode (Discrete 6.1 or Matrix 6.1).
h	V (video)-OFF mode indicator	¡3 ANALOG input indicator

This indicator is illuminated when the Video-OFF	This indicator is illuminated when an analog input
	source has been selected.
function is active.

5