3. If it is necessary to adjust the output level of each channel, press the CH.SEL button on the remote.
Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front left, front right, center, surround left, surround right and surround back speakers, the output levels can be adjusted between
The subwoofer can be adjusted between
These adjustments result will be stored to 7.1 CH. INPUT memory.
4. Adjust the main volume with the MAIN VOLUME knob or the VOL buttons on the remote.
To cancel the 7.1 CH. INPUT setting, press the 7.1 CH INPUT button on the front panel or press 7.1 CH IN on the remote.
Notes:
•When the 7.1 CH. Input is in use, you may not select a surround mode, as the external decoder determines processing.
•In addition, there is no signal at the record outputs when the 7.1 CH. Input is in use.
7.1 CH INPUT LEVEL |
|
|
|
| MENU STRUCTURE of 7.1CH INPUT LEVEL setup | ||||||
This menu is to adjust the speaker levels for 7.1- |
|
| |||||||||
channel input sources. |
|
|
|
|
| ||||||
Here you will adjust the volume for each channel so | |||||||||||
|
| ||||||||||
that they are all heard by the listener at the same |
|
| |||||||||
level. |
|
|
|
|
|
|
|
| |||
1. 3. 5. |
|
| 4. 5. |
|
| 2. 5. | |||||
|
|
|
|
|
|
|
|
| |||
D RECEIVER SR3001 |
|
|
|
|
|
|
|
|
|
| |
|
| DISP | MULTI AUTO | TUNED ST V – OFF NIGHT PEAK ATT ANALOG | SURROUND |
| |||||
|
| SLEEP AUTO SURR | DIRECT DISC 6.1 MTX 6.1 | EQ | DIGITAL | DIGITAL |
|
|
| ||
|
|
|
|
|
|
| L R |
|
|
| |
|
|
|
|
|
| AAC PCM |
|
|
|
| |
|
|
|
|
|
|
|
| DO |
|
| |
EAKER | MODE | DIRECT | SETUP |
| DISPLAY | MEMORY | CLEAR | ||||
| SURROUND | PURE | SIMPLE |
|
|
|
|
|
| ||
|
|
|
| ENTER |
|
|
|
|
|
| |
| AUTO | MENU |
| EXIT | BAND |
|
| ||||
ES |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
4. 5. | TV |
| MAIN | ||
VOL. | SLEEP | MUTE VOL. |
|
| |
| OSD |
| MENU | ||
1. 3. 5. |
| ENTER |
|
| |
| SET UP/ | MENU OFF | 2. 5. |
| |
| T.TONE |
|
| ||
| PURE DIRECT | AUTO | DTS |
| |
1. Press the CH.SEL button on the remote to enter this menu.
2. Press 3 or 4 cursor button to select desired channel.
3. Using the 1 or 2 cursor button, adjust the volume level of each channel.
Maximum +10dB
+9dB
ENGLISH
1 dB interval
Reference
1 dB interval
button
0dB
button
Minimum | |
|
|
Notes:
•When no operation is taken for 5 seconds, the level setup mode will be cancelled.
•The condition of these setup will be memorized to 7.1CH INPUT source.
29
