Marantz SR4300 manual FL Display

ENGLISH	!2PHONES jack for stereo headphones
	• When using headphones, the surround mode will automatically
	This jack may be used to listen to the SR4300’s output through a pair
	of headphones. Be certain that the headphones have a standard 1 / 4"
	stereo phone plug. Note that the speakers will automatically be turned
	off when the headphone jack is in use.
	Notes:
	change to STEREO.
	• The surround mode returns to the previous setting as soon as the
	plug is removed from the jack.
	!3A/D (Analog/Digital) SELECTOR button
	This is used to select between the analog and digital inputs.
	Note:

•This button is not used for an input source that is not set to a digital input in the system setup menu.

!4HT-EQ button

Used to turn on or off HT (Home Theater)-EQ mode when the surround mode is set as AUTO, DOLBY, DTS or STEREO.

This mode compensates for the audio portion of a movie sounding “bright”. When this button is pressed, “EQ” indicator lights up.

!5S- (Source) DIRECT button

When this button is pressed, the tone control circuitry is bypassed as well as Bass Management.

Notes:

•The surround mode is automatically switched to AUTO when the source direct function is turned on.

•S-DIRECT is turned off when the other surround mode is selected with the SURROUND mode selector knob or the surround mode buttons of the remote controller.

•Additionally, Speaker Configurations are fixed automatically as follow.

(Front SPKR = Large, Center SPKR = Large, Surround SPKR = Large, Sub woofer = On)

!6DIMMER button

When this button is pressed once, the display is dimmed.

When this button is pressed twice, the display is turned off and “DISP” indicator lights up.

Press this button again to turn the display ON again.

!7MUTE button

Press this button to mute the output to the speakers and headphones. Press it again to return to the previous volume level.

FL DISPLAY

as d f gh jkl¡0¡1 ¡2

DISP	AUTO	CD	DVD	VCR1 6.1CH-IN	DIRECT	SLEEP	ANALOG
TEST	ST	TUNER	TV	DSS / VCR2	AUTO SURR	EQ	DIGITAL	DIGITAL EX		PCM
	TUNED	TAPE	AUX	CDR/ MD	NIGHT	ATT		SURROUND	96kHz
								L	C	R
									F
								SL	S	SR

¡6 ¡5¡4 ¡3

aTEST tone indicator

This indicator blinks in generating the test tone in speaker level setup.

sDISP (Display Off) indicator

This indicator lights when the SR4300 is in the display off condition.

dTUNER’s indicators

AUTO : This indicator illuminates when the tuner’s Auto mode is in use.

ST(Stereo) : This indicator illuminates when an FM station is being tuned in stereo condition.

TUNED : This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality.

fINPUT SOURCE indicators

These indicators show the current input source.

g6.1 CHANNEL DIRECT IN indicator

This indicator lights up when the 6.1CH-IN has been selected as a input source.

hAUTO.SURR (Auto Surround mode)

indicator.

This indicator illuminates to show that the AUTO SURROUND mode is in use.

jDIRECT (Source direct) indicator

This indicator lights when the SR4300 is in the SOURCE DIRECT mode.

kEQ mode indicator

This indicator lights when the HT-EQ function is active.

lSLEEP timer indicator

This indicator lights when the seep timer function is in use.

¡0DIGITAL Input Indicator

This indicator lights when digital input has been selected.

¡1ANALOG input indicator

This indicator lights when an analog input source has been selected.

¡2SIGNAL FORMAT indicators

2DIGITAL, EX, 2 SURROUND, dts, ES, PCM and 96kHz

When the selected input is a digital source, some of these indicators will light to display the specific type of signal in use.

¡3ENCODED CHANNEL STATUS indicators

These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will light up.If the digital input signal is 2 channel PCM-audio, “L” and “R” will be displayed.

If Dolby Digital 5.1ch signal with Surround EX flag or DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S”, “SR” and “LFE” will show.

¡4ATT (Attenuation) indicator

This indicator lights when the attenuation function is active.

¡5NIGHT mode indicator

This indicator lights when the SR4300 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels.

¡6Main Information Display

This display shows messages relating to the status, surround mode, tuner, volume level or other aspects of unit’s operation.

6