Marantz SR4300 manual English, Preference, Pl Ii Pro Logic, MENU STRUCTURE of PREFERENCE setup

3. PREFERENCE

M-CH	2CH	6.1CH
ST		-IN

	4. 5.		7	8	9
			BASS	F.DIRECT	A/D
				0
					OFF
			SETUP/T.TONE		MENU
	1. 3. 5.			OK
			S-DIRECT
			MUTE		VOLUME	2. 5.
				NIGHT
1.	Select “3. PREFERENCE” in SETUP MAIN MENU with						or
2.	cursor button.
	Press the OK button.
3.	Press	or	cursor button to select a desired item.
4.	Press	or	cursor button to adjust.
5.	When you select “TO MAIN MENU” by pressing the or						button,
	you can return the SETUP MAIN MENU by pressing the OK
	button .
	Or press the		or cursor button to select “EXIT” then press the

OK button to exit the SETUP MENU.

BASS MIX

•The bass mix setting is only valid when “LARGE” is set for the front speakers and “YES” is set for the subwoofer at stereo playback .

•When the “BOTH” is selected, the low frequency signal range of “LARGE” are produced simultaneously from those channels and the subwoofer channel.

In this playback mode, the low frequency range expand more uniformly through the room, but depending on the size and shape of the room, interference may result in a decrease of the actual volume of the low frequency range.

•Selection of the “MIX” will play the low frequency signal range of the channel selected with “LARGE” from that channel only.

Therefore, the low frequency signal range that are played from the subwoofer channel are only the low frequency signal range of LFE (only during Dolby Digital or DTS signal playback) and the channel specified as “SMALL” in the setup menu.

LFE

•Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal.

Select 0dB, -10 dB or OFF with Left or Right cursor button.

MENU STRUCTURE of PREFERENCE setup

4. PL II (PRO LOGIC II)

In this mode, the SR4300 includes three controls to fine-tune the sound-field as follow.

M-CH	2CH	6.1CH
ST		-IN

	4. 5.		7		8	9
			BASS	F.DIRECT	A/D
					0
						OFF
			SETUP/T.TONE			MENU
	1. 3. 5.			OK
			S-DIRECT
			MUTE			VOLUME	2. 5.
				NIGHT
1. Select “4.PRO LOGIC II” in SETUP MAIN MENU with								or
	cursor button.
2. Press the OK button to enter the menu.
3.	Press	or	cursor button to select a desired item.
4.	Press	or	cursor button to select the mode or set the level.
5.	When you select “TO MAIN MENU” by pressing the or							button,
	you can return the SETUP MAIN MENU by pressing the OK
	button .
	Or press the		or cursor button to select “EXIT” then press the
	OK button to exit the SETUP MENU.
	PANORAMA: Select the Panorama mode On or Off with							or
			cursor button.
			Panorama wraps the sound of the front left and
			right speakers around you for an exciting
			perspective.
	DIMENSION: Set the Dimension level between 0 and 6 level in 1
			level interval with			or	cursor button.
			Adjust the soundfield either towards the front or
			towards the rear.
			This can be useful to help achieve a more suitable
			balance from all the speakers with certain
			recordings.
	C WIDTH: Set the Center width level between 0 and 7 level in
			1 level interval with			or	cursor button.

Center Width allows you to gradually spread the center channel sound into the front left and right speakers.

At its widest setting, all the sound from the center is mixed into the left and right.

This control may help achieve a more spacious sound or a better blend of the front image.

If “None” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

Note:

•When Center speaker is set ”None”, then C.WIDTH is set “7”. (The display appears “C.WIDTH = ✱✱✱”.)

MENU STRUCTURE of PROLOGIC II setup

ENGLISH

3.PREFERENCE	BASSMIX			BOTH
				MIX
	LFE			0 dB
				-10 dB
				OFF
	TO MAIN MENU		EXIT
		exit SETUP
			MENU

4.PROLOGIC

II setup

PANORAMA	OFF
	ON
DIMENSION	0	6
C.WIDTH	0	7

TO MAIN MENU EXIT

exit SETUP

MENU

23