ENTER THE DESIRED MENU ITEM OF THE

SETUP MENU

 

M-CH

2CH

6.1CH

 

ST

 

-IN

 

7

8

9

BASS

F.DIRECT

A/D

 

0 EXIT

 

OFF

SETUP/T.TONE

MENU

3.

4. OK

S-DIRECT

 

 

 

5.

 

MUTE

 

VOLUME

 

 

NIGHT

 

 

 

CHANNEL/SKIP

 

TV

CDR

 

 

 

TUNE/SEARCH

 

DVD

MD

 

 

 

MODE

PTY

 

VCR1

TAPE

 

 

VCR2

DISP./RDS

P.SCAN

 

DSS

CD

 

 

2.

 

ATT.

 

TUNER

AMP

 

 

SYSTEM REMOTE CONTROLLER RC4300SR

1.

Turn on this unit.

 

 

2.

Press the AMP button to set the amp mode.

3.

Press the MENU button or the OK button to enter the SETUP

4.

MENU.

 

 

Press the or cursor button to select the MAIN MENU item.

5.

Press the OK button or the MENU button to enter the desired

menu item.

After finishing all setup, press the MENU OFF button to exit the

SETUP MENU.

1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT)

Four digital inputs can be assigned as the desired source.

Use this menu to select the digital input jack to be assigned to the input source.

The Input Setup consists of 9 items, which are as below.

• D1AUTO to D4AUTO : Digital AUTO mode

If the input signal from the selected source is digital signal, this unit chooses a digital input automatically.

• DIG.1 to DIG.4 : Digital FIXED mode

The SR4300 chooses a digital input regardless of a input signal from the selected source.

• ANA : Analog mode

Use this menu to select the digital input jack to be assigned to the input source.

M-CH

2CH

6.1CH

ST

 

-IN

 

4. 5.

 

 

7

8

9

 

 

 

 

BASS

F.DIRECT

A/D

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

OFF

 

 

 

 

SETUP/T.TONE

 

MENU

 

 

1. 3. 5.

 

 

 

OK

 

 

 

 

 

S-DIRECT

 

 

 

 

 

 

 

MUTE

 

VOLUME

2. 5.

 

 

 

 

 

NIGHT

 

 

1.

Select “1.INPUT” in SETUP MAIN MENU with the or cursor

2.

button.

 

 

 

 

 

 

Press the OK button to enter the menu.

 

3.

Press the

or

cursor button to select the input source.

4.

Press or

cursor button to select the input function.

5.

Select “DxAUTO”,

“DIG.x” or “ANA” for input sources.

If you finish these setup, press the or

cursor button to select

 

“TO MAIN MENU” then press the OK button to return the SETUP

 

MAIN MENU.

 

 

 

 

 

 

Or press the

or

cursor button to select “EXIT” then press the

OK button to exit the SETUP MENU.

Notes:

When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input.

If Dx-AUTO is selected and a DVD, compact disc or LD is fast forwarded during playback, decoded signals may produce a skipping sound. In such cases, change the setting to DIGITAL.

Same digital input function cannot be set. In this case, the previous setting is set to ANALOG. Same digital input number cannot be set in Digital AUTO mode and Digital Fixed mode. For example, D1AUTO and DIG.1 are not set at same time.

ENGLISH

19

Page 23
Image 23
Marantz SR4300 manual Enter the Desired Menu Item Setup Menu, D1AUTO to D4AUTO Digital Auto mode, ANA Analog mode