HDMI
| SYMPTOM |
| CAUSE |
| REMEDY | |
|
|
| ||||
The display does not | The connected monitor or projector |
| ||||
appear over an HDMI | does not support HDCP. |
| ||||
connection. |
|
|
|
|
| |
| The HDMI input of on the TV is | Set HDMI input so that it turns on, as | ||||
|
|
| ||||
|
|
| not on. |
| explained in the TV's instruction manual. | |
|
|
|
|
| ||
|
|
| The HDMI output on the source | Set HDMI output so that it turns on, as | ||
|
|
| component (DVD, Set Top Box, | explained in the source component's | ||
|
|
| etc.) is not on. |
| instruction manual. | |
|
|
|
|
| ||
|
|
| The HDMI mode is not correctly | Set HDMI input on the FUNC INPUT | ||
|
|
| set on the SR6001. |
| SETUP menu as explained on page 28. | |
|
|
|
|
| ||
|
|
| The HDMI output video resolution | Set the resolution so that it matches, as | ||
|
|
| of the source component (DVD, | explained in the instruction manuals of both | ||
|
|
| Set Top Box, etc.) does not match | components. | ||
|
|
| the TV specifications. |
|
| |
|
|
|
|
| ||
|
|
| The device is connected with a | A 5 m or shorter cable is recommended to | ||
|
|
| ensure stable operation and prevent image | |||
|
|
|
|
|
| quality deterioration. |
|
|
|
|
| ||
|
|
| Power to the SR6001 is off. | Turn on the power to the SR6001. | ||
|
|
| (When the SR6001 is on standby, |
| ||
|
|
| HDMI connections cannot be |
| ||
|
|
| turned on.) |
|
| |
|
|
|
|
|
|
|
|
|
| The | connection | between | Shut off and then turn the power back on to |
|
|
| HDMI | components | was not | the SR6001, TV and source component. |
|
|
| authenticated. |
|
| |
|
|
|
|
| ||
Time is needed for the | The | connection | is being | There is nothing wrong with the system. | ||
display of an | HDMI | authenticated between the HDMI | Some HDMI devices require time for | |||
connection to appear. | devices. |
| authentication. | |||
|
|
|
|
| ||
Audio | is not | played | The HDMI audio output of the | Set the HDMI audio output so that it turns | ||
back | over an | HDMI | source component (DVD, Set Top | on, as explained in the source component's | ||
connection. |
| Box, etc.) is not on. |
| instruction manual. | ||
|
|
|
|
| ||
|
|
| The signal format of the source | Set the HDMI audio output so that it can | ||
|
|
| component (DVD, Set Top Box, | connect to the SR6001, as explained in the | ||
|
|
| etc.) is not supported by the | source component's instruction manual. | ||
|
|
| SR6001. |
|
| |
|
|
|
|
| ||
|
|
| The SR6001 is set to the HDMI | In the “THROUGH” mode, sound is not | ||
|
|
| audio “THROUGH” mode. | produced from the SR6001. Set it to | ||
|
|
|
|
|
| “ENABLE”. (see page 39) |
|
|
| ||||
The DVD player does not support | • Use a | |||||
back | over an | HDMI | CPPM, therefore it cannot output | CPPM. | ||
connection. |
| HDMI audio. |
| • Turn on PCM downsampling on the DVD | ||
|
|
|
|
|
| player. |
|
|
|
|
|
| • Use an analog connection. |
|
|
|
|
|
|
|
ENGLISH
59