Marantz SR6001 manual Setup, English

SETUP

After all components are connected, initial setup must be performed.

ONSCREEN DISPLAY MENU SYSTEM

The SR6001 incorporates an onscreen menu system, which makes various operations possible by using the cursor (3, 4, 1 , 2) and ENTER buttons on the remote control unit or on the front panel.

Note:

• To view the onscreen displays, make certain you

have connected the MONITOR OUT jack on the rear

panel to the composite, S-Video, component video

or HDMI input of your TV or projector. (See page

19, 20)

RC5001SR BUTTON CONTROL

	MULTI/ CAT	M-SPKR	UP button
	INFO	MENU	MENU button
			Press this button to display the
LEFT button			OSD menu system.
	ENTER
ENTER button	T.TONE		RIGHT button
	/SET UP	EXIT
			EXIT button
			Press this button to exit the OSD
	REC T.DISP	PTY F.DIRECT	menu system.

ENGLISH

1.	Press the AMP button on the remote control
	unit. (This step is not needed when operating
	the setup menus from the SR6001.)
2.	Press the MENU button on the remote control
	or press the MENU button on the front panel.
	The “MAIN MENU” of the OSD menu system is
	displayed.
	There are 6 items in the MAIN MENU.
3.	Select the desired sub-menu with the 3 or 4
	cursor buttons and press the ENTER button.
	The display will change to the selected sub-
	menu.

Notes:

•If you desire to adjust any sub-menu, you need to set it to UNLOCKED.

•To lock sub-menus, set items 1-6 on the MAIN MENU to “LOCKED”.

<LOCKING SUBMENUS>

(1)Move the cursor to “1. INPUT SETUP” in the

MAIN MENU.

(2)Select the “0” mark left of “LOCKED” with the 1 or 2 cursor buttons.

4.To exit from OSD menu system, press the EXITbutton, or move the cursor to EXIT and press the ENTER button.

Note:

•Settings are entered with the ENTER button on the unit or the remote control unit.

DOWN button

SR6001 FRONT BUTTON CONTROL

		UP button	ENTER button
	MULTI
AUTO	MULTI SPEAKER	BAND T-MODE	MEMORY
	7.1CH INPUT	DISPLAY
HT-EQ			MultEQ
LEFT button	MENU	EXIT	RIGHT button
		ENTER

MIC

MENU button		EXIT button
Press this button to display the		Press this button to exit the
	DOWN button
OSD menu system.		OSD menu system.

TUNER CD CDR MD

TAPE AUX1 AUX2 AMP

REMOTE CONTROLLER

RC5001SR

AMP (Amplifier) button

25