Marantz SR6009 owner manual Dynamic Compression, Low Frequency Effects, Center Gain, Panorama

Contents Connections Playback Settings Tips Appendix

oDynamic Compression

Compress dynamic range (difference between loud and soft sounds).

Auto:	Automatic dynamic range compression
	on/off control according to source.
Low / Medium / High:	These set the compression level.
Off:	Dynamic range compression is always off.

0“Auto” can only be set when Dolby TrueHD signals are input.

0The default setting is “Off”. When the input signal is Dolby TrueHD source, the default setting is “Auto”.

oLow Frequency Effects

Adjust the low frequency effects level (LFE).

nWhen “Input Mode” is set other than to “7.1CH IN”

-10 dB – 0 dB (Default : 0 dB)

nWhen “Input Mode” is set to “7.1CH IN”

0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)

For proper playback of the different sources, we recommend setting to the values below.

0Dolby Digital sources : 0 dB

0DTS movie sources : 0 dB

0DTS music sources: -10 dB

oCenter Gain

Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front.

0.0 – 1.0

0You can set this when the sound mode is set to DTS Neo:X.

0The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front.

oPanorama

The front sound field is expanded further towards the back to create a seamlessly inclusive sound impression.

On:	Use “Panorama”.
Off	Do not use “Panorama”.
(Default):

You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.

Front panel Display Rear panel 153 Remote Index