Marantz SR6009 owner manual Display on this unit shows nothing

Contents Connections Playback Settings Tips Appendix

oOperations cannot be performed through the remote control unit

Symptom		Cause / Solution	Page
Operations cannot be	0	Batteries are worn out. Replace with new batteries.	9
performed through the
	0	Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.	9
remote control unit.
	0	Remove any obstacle between this unit and the remote control unit.	－
	0	Insert the batteries in the proper direction, checking the q and w marks.	9
	0	The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb	－
		light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
	0	The operation target zone does not correspond to the zone setting specified on the remote control unit.	148
		Press the MAIN or ZONE2 button to select the operating zone of the remote control.
	0	When using a 3D video device, the remote control unit of this unit may not function due to effects of	－
		infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
		direction of units with the 3D communications function and their distance to ensure they do not affect
		operations from the remote control unit of this unit.

oDisplay on this unit shows nothing

Symptom		Cause / Solution	Page
Display is off.	0	Set “Dimmer” on the menu to something other than “Off”.	209
	0	When the sound mode is set to “Pure Direct”, the display is off.	118

Front panel Display Rear panel 221 Remote Index