Marantz SR6009 Power does not turn on / Power is turned off, Symptom Cause / Solution, 205, 263

Contents Connections Playback Settings Tips Appendix

oPower does not turn on / Power is turned off

Symptom		Cause / Solution	Page
Power does not turn on.	0	Check whether the power plug is correctly inserted into the power outlet.	61
Power automatically turns	0	The sleep timer is set. Turn on the power again.	131
off.
	0	“Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To	205
		disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.
Power turns off and the	0	The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off,	263
power indicator flashes in		wait about an hour until this unit cools down sufficiently, and then turn the power on again.
red approx. every 2
	0	Please re-install this unit in a place having good ventilation.	－
seconds.
Power turns off and the	0	Check the speaker connections. The protection circuit may have been activated because speaker cable	31
power indicator flashes in		core wires came in contact with each other or a core wire was disconnected from the connector and
red approx. every 0.5		came in contact with the rear panel of this unit. After unplugging the power cord, take corrective action
seconds.		such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire.
	0	Turn down the volume and turn on the power again.	63
	0	This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center.	－
Power does not turn off	0	The power supply of ZONE2 is turned to ON. To turn off the power supply of this unit (standby), press the	－
even when the power		ZONE2 ON/OFF on the main unit, or press the POWER X button after pressing the ZONE2 button on the
button is pressed, and the		remote control unit to turn off the power supply of ZONE2.
display shows “ZONE2
On”.

Front panel Display Rear panel 220 Remote Index