Marantz SR6009 owner manual Cannot connect to a wireless LAN network, 199, Points

Contents Connections Playback Settings Tips Appendix

oCannot connect to a wireless LAN network

Symptom		Cause / Solution	Page
Cannot connect to the	0	The network name (SSID), password and encryption setting have not been set up correctly. Configure the	199
network.		network settings according to the setting details of this unit.
	0	Shorten the distance from the wireless LAN access point and remove any obstructions to improve access	－
		first before re-connecting again. Place the unit away from microwave ovens and other network access
		points.
	0	Configure the access point channel settings away from channels that are being used by other networks.	－
	0	This unit is not compatible with WEP (TSN).	－
Cannot connect to WPS.	0	Check that the WPS mode of the router is operating.	－
	0	Press the WPS button on the router and then press the “Connect” button displayed on the TV within 2	－
		minutes.
	0	A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to	199
		“None”, “WPA-PSK (AES)” or WPA2-PSK (AES).
	0	If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS	－
		button. In this case, use the “Scan Networks” or “Manual” method to connect.
Cannot connect to the	0	Update the iPhone/iPod touch/iPad firmware to the latest version.	－
network using iPhone/iPod
	0	When using a USB cable to configure the settings, the iOS device firmware version needs to support	－
touch/iPad.		iOS5 or later. When configuring the settings via a wireless connection, iOS7 or later needs to be
		supported.

Front panel Display Rear panel 235 Remote Index