Marantz SR6009 owner manual Hdmi Control, Pass Through Source, Use Hdmi control function

Contents Connections Playback Settings Tips Appendix

oHDMI Control

You can link operations with devices connected to HDMI and compatible with HDMI Control.

On:	Use HDMI control function.
Off	Do not use HDMI control function.
(Default):

0Please consult the operating instructions for each connected device to check the settings.

0Refer to “HDMI control function” for more information about the HDMI control function. (v p. 130)

oPass Through Source

Sets the HDMI connector that inputs HDMI signals when in standby.

Last	The most recently used input source will
(Default):	go into standby mode.
CBL/SAT / DVD /
Blu-ray / Game /	Pass through the selected input source.
AUX1 / AUX2 /
Media Player / CDz:

z“Pass Through Source” can be set when any of the HDMI connectors is assigned to “CD” for the input source in the “Input Assign” setting. (v p. 175)

NOTE

If the “HDMI Control” settings have been changed, always reset the power to connected devices after the change.

“Pass Through Source” can be set when “HDMI Control” is set to “On” or “HDMI Pass Through” is set to “On”.

Front panel Display Rear panel 167 Remote Index