ENGLISH
CONNECTIONS
Note
Connect the tuner to other equipment in the below sequence to use the tuner.
1.Connect an FM antenna to the FM ANTENNA A terminal.
2.Connect an AM loop antenna to the AM ANTENNA terminals. The terminals do not have a particular polarity.
3.Connect the LINE OUT and REMOTE CONTROL connectors to their corresponding terminals on a stereo amplifier using the provided cords. (Turn power to the stereo amplifier OFF before making the connections.)
4.Plug the power cable of the tuner into a power outlet.
5.This completes connections. Point the antennas in a direction of good reception.
|
|
| CAUTION: | |
|
|
| Do not plug the power cord of any | |
|
|
| component into AC outlets and do not | |
|
|
| turn their POWER switches on until | |
|
|
| connections have been performed. | |
| ||||
| (provided) | AM(MW)Outdoor Antenna | ||
|
| |||
|
| 5 to 12m | ||
|
|
| AM(MW)Indoor Loop Antenna | |
|
|
| (provided) | |
Matching |
|
|
| |
Transformer |
|
| Tuner | |
(optional) |
|
| ||
|
|
| ||
FM ANTENNA B | FM ANTENNA A | AM ANTENNA |
| |
75‰ | 75‰ | GND AM | LINE OUT REMOTE | |
|
|
| CONTROL | |
|
|
| RESET | |
|
|
| R L | |
RCA Pin Plug Cord | RCA Pin Plug Cord | |||
(Provided) | ||||
(Provided) |
| |||
|
| |||
To AC Outlet
Stereo Amplifier
|
|
|
|
| S Y S T E M 1 : M I N I M U M 8 O H M S |
|
|
|
|
|
| S Y S T E M 2 : M I N I M U M 8 O H M S |
|
|
|
|
|
| S Y S T E M 1 A N D 2 : M I N I M U M 1 6 O H M S | |
|
|
|
|
| SPEAKER SYSTEMS 1 |
|
|
|
|
|
| R | L |
|
|
|
|
|
| REMOTE |
PHONO | CD TUNER AUX | TAPE 2 | TAPE 1 | CONT. | ||
| ||||||
|
| IN | OUT | IN | OUT | IN |
| L |
|
|
| L |
|
|
|
|
|
|
| OUT |
| R |
|
|
| R |
|
|
|
|
|
| R | L |
|
|
|
|
| SPEAKER SYSTEMS 2 |
|
7Assembling the AM loop antenna
1.Take out the connection
line.
2. Bend the base part in the reverse direction.
3. Insert the hook at the bottom of the loop part into the slot at the base part.
4. Place the antenna on a stable surface.
Note
•Do not plug in the mains cord until all connections have been completed.
•When making connections, also refer to the operating instructions of the other components.
•Be sure to connect the left and right channels properly (left with left, right with right).
•Note that binding
•Even if an external AM antenna is used, do not disconnect the AM loop antenna.
•Make sure AM loop antenna lead terminals do not touch metal parts of the panel.
6
