PARTS NAMES AND FUNCTIONS
FRONT PANEL
!9 @0 | !8 | !2 | !3 | !4 |
F M / A M T U N E R S T 6 0 0 1
DOWN | PRESET | UP |
ON/OFF | TIMER SET |
TIMER DAILY | TUNED | STEREO | RDS | PTY | TP TA | MEMO |
|
|
|
|
|
| PRESET CH |
|
|
|
|
|
|
|
| kHz |
|
|
|
|
STANDBY |
|
|
|
|
|
|
| MHz |
|
|
|
|
| AB | WIDE NARROW |
|
|
|
|
|
|
|
|
|
|
POWER ON/STAMDBY | ANTETTA | FM IF BAND | ST.NAME | TUNING | DOWNTUNING | UP |
|
|
|
|
|
|
| TIME ADJ./DISPLAY | MODE | CANCEL | NEXT | MEMO |
|
|
| ||||
|
|
|
|
|
|
|
|
|
| FM MODE | RDS | BAND |
q w | e | r | t y u | i |
| o !0 !1 | !5 |
| !6 !7 | |||
q POWER ON /STANDBY button | !0NEXT button |
This button is used to power on or power standby. | This button is used for advancing to the next step during |
| time adjustment or manual filing, etc. |
wSTANDBY indicator
This indicator illuminates red when the unit’s status is | !1MEMO button |
standby. | This button is used for presetting the broadcasting |
When daily timer is activated, this indicator lights green. | stations. |
ENGLISH
eANTENNA A/B button
This button is used selection of the FM antenna A or B.
rIF BAND button
This button is used for selecting the bandwidth of the FM broadcast.
tTIME ADJ (adjust) button
This button is used for adjusting the current time.
yST.NAME/DISPLAY button
This button is used for displaying the signal strength.
FM | MW/LW | Condition |
More than 50dB | More than 75dB | Signal strength is good |
Signal strength is marginal | ||
Signal strength is poor | ||
|
|
|
Less than 9dB | Less than 49dB | Loss of the signal |
Press this button slightly longer (for more than 1.5 second) to file in manually stations name in the preset memory.
uTUNING MODE button
This button is used for selecting the manual tuning or the fine tuning mode. Fine tuning mode is available only in the FM band.
iTUNING 5∞ (UP/DOWN) button
This button used for tuning in the desired broadcasting stations or adjusting the time, or manual tuning, etc.
oCANCEL button
This button is used for canceling the program during manual file or adjusting the on/off time of the timer.
!2(Timer) ON/OFF button
This button used for engaging the daily timer function.
!3TIMER SET button
This button is used for presetting the time when the system is turned on and off every day at a specified time.
!4PRESET 5∞ (UP/DOWN) button
This button used for preset in the desired broadcasting stations.
!5FM MODE button
This unit automatically switches into the STEREO mode when a FM stereo broadcast is received press this button to change the monaural mode, then the “STEREO” indicator will go out on the display.
!6RDS button
When the FM RDS broadcasting is displayed, and it retrieves, this button is operated. (See page 9)
!7BAND button
This button is used for selecting the FM, MW or LW broadcast.
!8DISPLAY/INDICATOR
!9Antenna A or B indicator
@0FM WIDE or NARROW band indicator
3
