PARTS NAMES AND FUNCTIONS
REAR PANEL
ENGLISH
FM ANTENNA B | FM ANTENNA A | AM ANTENNA | ～ |
75Ω | 75Ω | GND AM | LINE OUT | REMOTE |
|
| |
|
|
|
|
| CONTROL |
|
|
|
|
|
|
|
| RESET |
|
|
|
| R | L |
|
|
|
q |
| w |
| e r | t | y | |
q FM antenna terminals A/B (75 ohms)
Connect an external FM antenna with a coaxial cable, or a cable network FM source.
t RESET switch
Press this switch gently with the tip of a ballpoint pen or similarly thin object if the tuner does not respond to a button on the front panel. (See page 11.)
w AM antenna and ground terminals
Connect the supplied AM loop antenna. Use the terminals marked “AM” and “GND”. The supplied AM loop antenna will provide good AM reception in most areas. Position the loop antenna until you hear the best reception.
y Power cable
Connect the cable to a household power outlet (230V AC).
e LINE OUT (analog output) connectors
The audio signals are output from these connectors.
r REMOTE CONTROL connector
Using the supplied remote control connecting cord, this connector enable this unit to be connected to a Marantz component equipped with remote control connectors. This connection make it possible to control an entire system that centers on the amplifier or other such component.
5
