Marantz ST6001 manual RDS Display, Ps → Pty → Rt → Ta → Ct → Ps

ENGLISH

OPERATIONS

RDS DISPLAY

1.Select the FM band. RDS can be received only in FM.

2.Select the RDS broadcasting by using the TUNING 5∞ button i.

Then, RDS will light up in the upper side of the FTD display. And the related data, if received, will be displayed in the type of received data (PTY, RT, TP, TA)

3.RDS

1)The default of the RDS mode is PS.

2)Press the RDS button !6.

Each time you press the button briefly (1.5 second or less), the modes will change as follows

PS → PTY → RT → TA → CT → PS

3)PS mode

–When you select the PS with the RDS button !6, “PS” will blink for about 4 seconds.

–After 4 seconds, PS or a station name entered by manual file will be displayed.

4) PTY mode

–When you select the PTY with the RDS button !6, PTY will blink for about 4 seconds, the type of received PTY will be displayed.

–If there is no PTY data among received broadcasting, RDS mode will be switched to PS mode automatically.

5) RT mode

–When you select the RT with the RDS button !6, “RT” will blink for about 4 seconds, After 4 seconds, the data received broadcasting, the RDS mode will be automatically switched to the PS mode.

6) TA mode (TP search function)

–When you select the TA with the RDS button !6, “TA” will blink for about 4 seconds, TP received broadcasting will be searched with the FM frequency increasing in 50 kHz steps.

–If TP received broadcasting is searched, the increase in frequency will be stop and it is asked whether TA will be received or not.

–If TP and TA turn off while you are receiving the TA, the tuner will search the TA broadcasting again with the FM frequency increasing in 50 kHz steps.

7) CT mode

–When you select the CT with the RDS button !6, “CT” will blink for about 4 seconds. After 4 seconds, the clock time together with the frequency will be displayed. “CT” can be received regardless of whichever RDS mode. The tuner is set to.

* Not to use CT mode,

1.Press and hold the RDS button !6for longer than 8 seconds, and press briefly the RDS button !6within 0.5 seconds.

–The indicator will be changed as follows: PS → PTY → RT → TA → (NO CT) → PS

–In this mode, although “CT ” data are entered, the time is not changed to the current time.

2.In ”NO CT“ mode, press and hold the RDS button !6for longer than 8 seconds.

–The indicator will be changed as follows: PS → PTY → RT → TA → CT

3.PTY Search

1) Press the RDS button !6for longer then 1.5 second. Then “SEARCH” will be shown in the display.

2) Select the desired PTY mode by using the PRESET 5∞ button !4.

3)

–If you press the NEXT button !0, the PTY mode wills blink in the clock display.

–Searching will start when you push the TUNING 5∞ button i.

–When the PTY mode that you have selected is searched, searching will stop and the PTY mode will be displayed.

–If there is no program in the PTY mode, you have selected, searching will stop at the frequency started.

!4

F M / A M T U N E R S T 6 0 0 1

TIMER DAILY ONCE TUNED STEREO RDS PTY PT TP TA MEMO

PRESET CH

kHz

MHz

i !0 !6

10