TROUBLESHOOTING
If your Tuner should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization.
Symptom | Cause | Measures | Page |
|
|
|
|
No sound | • INPUT SELECTOR of amplifier is not | • Set to “TUNER”. | – |
| Select “TUNER” in INPUT SELECTOR. |
|
|
| • Volume of amplifier positioned in | • Adjust Volume accordingly. | – |
| “MIN.” |
|
|
| • The terminal for system connection is | • Connection correctly. | 6 |
| pullet out. |
|
|
|
|
|
|
Only noise is heard | • The antenna is pulled out. | • Connect the antenna on the rear | 6 |
|
| panel. |
|
| • The frequency is not detected exactly. | • Set the frequency correctly. | 7 |
|
|
|
|
Broadcasting is received but | • The position of antenna is not suitable. | • Install the antenna again after | 6 |
with noise |
| locating the best reception position. |
|
| • The power of CD player is turned on. | • Turn off CD player. | – |
|
|
|
|
ENGLISH
OTHERS
7WHEN TO USE RESET SWITCH
•When this system is subjected to an electrical shock.
•When the power is irregular.
In the above cases, function buttons may not often operate or the display may operate wrongly. In these cases, try the following:
— Rear panel —
RESET SWITCH
LINE OUT | REMOTE |
| CONTROL |
RESET
R L
Press the RESET switch lightly once or twice with a pencil or a ballpoint pen.
7CARE AND MAIN TENANCE
This section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz equipment.
7CLEANING OF EQUIPMENT
EXTERNAL SURFACES
The exterior finish of your ST6001 will last indefinitely with proper care and cleaning. Never use scouring pads, steel wool, scouring powders or harsh chemical agents (e.g., lye solution), alcohol, thinners, benzine, insecticide or other volatile substances as these will mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment gets dirty, wipe the external surfaces with a soft,
If the equipment becomes heavily soiled:
–dilute some washing up liquid in water, in a ratio of one part detergent to six parts water;
–dip a soft, lint free cloth in the solution and wring the cloth out until it is damp;
–wipe the equipment with the damp cloth;
–dry the equipment by wiping it with a dry cloth.
7REPAIRS
Only the most competent and qualified service technicians should be allowed to service your unit. Marantz and its factory trained warranty station personnel have the knowledge and special equipment needed for the repair and calibration of this precision instrument.
In the event of difficulty, call the proper
Memory backup
In case a power outage occurs or the power cord is accidentally unplugged, the ST6001 is equipped with a backup function to prevent memory data such as the preset memory from being erased.
The memory funcitons are backed up for up to about one week.
11