ENGLISH
OPERATION
7Direct Number Access mode
You can not call channel if the preset channel search mode is selected.
1. Press the Preset channel buttons x to enter the desired channel number.
For example, to enter the number 13ch press the Preset channel buttons x as shown below.
13
The display changes as follows.
2.Press the ENTER button v to tune to the channel.
Note
•If no button is pressed within five seconds after entering
•Pressing a button other than Preset channel buttons x or ENTER button v cancels the direct number access procedure.
7Preset channels (XM)
1.Use the “All channel search mode” or “Category search mode” or “Direct Number Access mode” to tune in the channel to be preset in the memory.
2.Press the MENU button u or ⁄2to select menu.
3.Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to select “Memory”.
4.Press the TUNING/PRESET knob !4, or ENTER button v to set the preset mode and make the preset channel number flash.
•Steps 1 to 4 can be skipped when using the MEMO ⁄6button.
When this button is pressed, the preset memory standby mode is set, regardless of the menu setting at that time.
5.While the preset channel number is flashing, either press the SHIFT button ⁄3to select the desired memory group (A to J) or press a MEMORY GROUP (A to J) button n.
6.While the preset channel number is flashing, either turn the TUNING/PRESET knob !4, press the CHANNEL/CONTROL ⁄4or Preset channel button x to select the desired preset channel (1 to 10).
7.While the preset channel number is flashing, either press the TUNING/PRESET knob !4or MEMO button ⁄6to store the channel in the preset memory.
•To preset other channels, repeat steps 2 to 6.
•A total of 100 XM Satelite Radio Channels can be preset — 10 channels (channels 1 to 10) in each of groups A to J.
FM/AM TUNER ST7001
POWER
| r | u |
| !4 |
| STANDBY |
| ON |
|
| 1 | 2 | 3 |
|
| 4 | 5 | 6 |
|
x |
|
|
|
|
| 7 | 8 | 9 |
|
|
| DIMMER | DISPLAY |
|
| 10 |
|
|
|
|
| TUNING |
|
|
|
| TE |
|
|
|
| N R |
|
|
|
| E |
| ⁄2 |
| BAND |
| MENU | |
v |
| SHIFT |
| |
|
|
| ||
|
|
|
| ⁄3 |
|
| CHANNEL/ |
| ⁄4 |
|
| CONTROL |
| |
| A/B | C/D | E/F |
|
n | G/H | I/J |
| |
| SLEEP | TIMER | MEMO |
|
|
|
|
| ⁄6 |
REMOTE CONTROLLER
RC7001ST
18