Marantz ST7001 TIMER PROGRAMS 7About the Timer Programs, 7Timer Program Examples, Other Operation

ENGLISH

OTHER OPERATION

TIMER PROGRAMS

7About the Timer Programs

•This unit has three timer programs so that you can turn it on and off automatically at certain times and on certain days of the week.

•Timer programs can be set for single operation (Once) or everyweek operation (Everyweek) or everyday operation (Everyday) or the days of the week operation (Weekday).

7Timer Program Examples

•The following examples highlight some of the ways in which you can use the timer programs.

Example 1: To wake up to your favorite radio station every morning, set as follows:

TIMER PROGRAM 1 SET → FM/AM → A1 FM 87.50MHz → EVERYDAY → ON TIME= 7:00AM → OFF TIME= 7:30AM (If you want a radio alarm only on weekdays, select “WEEKDAY” instead of “EVERYDAY” and specify “MON-FRI”.)

Example 2: To listen a radio program on only this Sunday, set as follows:

TIMER PROGRAM 2 SET → FM/AM → B1 AM520kHz

→ONCE → SUNDAY → ON TIME= 9:00PM → OFF TIME=10:00PM

7Timer Program Overlap

•If two or three timer programs are set to the same ON TIME, the timer program with the lowest number has priority.

For example, if Timer program 1 and Timer program 2 are both set to an ON TIME of 7:00AM, Timer program 1 has priority and Timer program 2 is ignored.

Timer program 1: 7:00AM - 1:00PM (This timer has priority)

Timer program 2: 7:00AM - 0:30PM

If the setting of the two timer program overlaps, the earlier timer has priority.

Timer program 1: 9:00AM - 10:00AM

Timer program 2: 8:00AM - 10:00AM (Timer program 2 has priority)

7Timer Program Setting

•You must set the clock time before you set the timer programs.

•You need to store preset stations before you set the timer programs.

1.Press the TIMER button ⁄7, “TIMER PROGRAM 1” is displayed.

2.The display changes as follows each time the TUNING/PRESET knob !4 is turned or the CHANNEL/CONTROL button ⁄4is pressed.

TIMER PROGRAM 1 TIMER PROGRAM 2

TIMER PROGRAM 3

20

3.Press the TUNING/PRESET knob !4or ENTER button v to select timer program number.

4.The display indicate “TIMER PROGRAM x SET”.

Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4, the display changes as follows.

TIMER PROGRAM x SET TIMER PROGRAM x CONFIRM

TIMER PROGRAM x OFF TIMER PROGRAM x ON

• If timer program is already available, to select “TIMER PROGRAM x CONFIRM” to scroll the timer setting contents.

• If timer program is already available, to select “TIMER PROGRAM x ON” to activate the timer.

• To select “TIMER PROGRAM x OFF” to turn off the timer program.

5.Press the TUNING/PRESET knob !4or ENTER button v to select “TIMER PROGRAM x SET”.

6.The display indicate “TIMER PROGRAM x FM/AM”. Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4, the display changes “TIMER PROGRAM x FM/AM” or “TIMER PROGRAM x XM”.

7.Press the TUNING/PRESET knob !4or ENTER button v to select “FM/AM” or “XM”.

8.Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to select Preset station to be programed.

9.Select the Operation method.

q Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to select operation method “ONCE”, “EVERYWEEK”, “EVERYDAY” or “WEEKDAY” .

w Press the TUNING/PRESET knob !4or ENTER button v to decide the operation.

When you select “ONCE” or “EVERYWEEK”, you can select the day of the week by turning the TUNING/PRESET knob !4or pressing the CHANNEL/CONTROL button ⁄4.

When you select “WEEKDAY”, use the TUNING/PRESET knob !4or pressing the CHANNEL/CONTROL button ⁄4to select the first day, and then press the TUNING/PRESET knob !4 or ENTER button v.