OTHER OPERATION
Use the TUNING/PRESET knob !4or pressing the CHANNEL/CONTROL button ⁄4to select the last day. Then press the TUNING/PRESET knob !4or ENTER button v.
10.Set the On time.
q Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to adjust the hour for the On time and press the TUNING/PRESET knob !4or ENTER button v.
w Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to adjust the minutes for the On time and press the TUNING/PRESET knob !4or ENTER button v.
11.Set the Off time.
q Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to adjust the hour for the Off time and press the TUNING/PRESET knob !4or ENTER button v.
w Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to adjust the minutes for the Off time.
12.Set the timer program.
q Press the TUNING/PRESET knob !4or ENTER button v to decide the timer program setting. Timer indicator lights up and setting contents are scrolled.
Note
•Timer program can activate regardless of power on or standby mode.
•When timer program is finished, the unit goes to standby mode.
•You can cancel the Timer program setting procedure at any time by pressing the TIMER button ⁄7.
7Confirm and change timer program
•You can check and change the timer program setting as follows.
1.Press the TIMER button ⁄7.
2.Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to select timer program number.
3.You can change the displayed contents with the TUNING/PRESET knob !4or CHANNEL/CONTROL ⁄4 and ENTER buttons v if necessary.
Note
•Timer program is not changed if you quit confirming halfway through a procedure.
7Timer program off
1.Press the TIMER button ⁄7, “TIMER PROGRAM 1” is displayed.
2.Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to select timer program number.
3.Press the TUNING/PRESET knob !4or ENTER button v, “TIMER PROGRAM x SET” is displayed.
4.Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to select “TIMER PROGRAM x OFF”.
5.Press the TUNING/PRESET knob !4or ENTER button v to turn off the timer program.
Note
•To turn a timer program back on again, repeat this procedure and select “TIMER PROGRAM x ON”.
FM/AM TUNER ST7001
POWER
!4
STANDBYON
| 1 |
| 2 | 3 |
| 4 |
| 5 | 6 |
| 7 |
| 8 | 9 |
|
| DIMMER | DISPLAY | |
| 10 |
|
|
|
|
| TUNING |
| |
|
| NTE |
| |
|
| E | R |
|
| BAND |
|
| MENU |
v |
|
| SHIFT | |
|
|
| ||
|
| CHANNEL/ | ⁄4 | |
|
| CONTROL | ||
| A/B |
| C/D | E/F |
G/H I/J
SLEEP TIMER MEMO
⁄7
REMOTE CONTROLLER
RC7001ST
ENGLISH
21