OTHER OPERATION
SETTING THE CLOCK
7Present time setting
•To operate the timer program, you must set the present time. The clock time can be set
The clock displays “SUNDAY” “12H SYSTEM” “0:00AM” at initial.
1.Press and hold down the TIMER button ⁄7until the “CLOCK 0:00AM” is displayed.
2.Press the TUNING/PRESET knob !4or ENTER button v, the day of the week flashes.
3.Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to select a day.
4.Press the TUNING/PRESET knob !4or ENTER button v, “12H SYSTEM” is flashes.
7 | Displaying present time | ENGLISH |
|
1.A present time can be displayed for 5 seconds by holding down the TIMER button ⁄7more than 3 seconds.
FM/AM TUNER ST7001
POWER
!4
STANDBYON
If you want to select 24H SYSTEM, either turn the
TUNING/PRESET knob !4or press the
CHANNEL/CONTROL button ⁄4.5.Press the TUNING/PRESET knob !4or ENTER button v to set the desired system. The hour digit flashes.
5 | 5 | 5 |
| 5 | |
5 |
| |
5 | 5 | 5 |
|
|
6. Either turn the TUNING/PRESET knob !4or press the |
| |
CHANNEL/CONTROL button ⁄4to set the hours and |
| |
press the TUNING/PRESET knob !4or ENTER button | v | |
v. The minute digit flashes. | ||
|
7.Either turn the TUNING/PRESET knob !4or press the CHANNEL/CONTROL button ⁄4to set the minutes, and press the TUNING/PRESET knob !4or ENTER button v. The display flashes.
5 | 5 | 5 | 5 |
5 |
|
| 5 |
5 |
|
| |
5 | 5 | 5 | 5 |
|
8.Press the TUNING/PRESET knob !4or ENTER button v to confirm the actual time. The clock now starts.
• In the event of a power failure or when the AC mains cord is disconnected. You must reset the clock.
1 2 3
4 5 6
7 8 9
DIMMER DISPLAY
10
| TUNING | |
| NTE | |
| E | R |
BAND |
| MENU |
| SHIFT | |
|
CHANNEL/
CONTROL
A/B C/D E/F
G/H I/J
SLEEP TIMER MEMO
REMOTE CONTROLLER
RC7001ST
⁄4
⁄7
19