Remote control connection
When you use this unit connected to a marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly.
Connection
Use the supplied remote control cable to connect the REMOTE CONTROL IN connector of this unit to REMOTE CONTROL OUT connector of the amplifier.
Setting
Set the remote control switch on the rear panel of this unit to“EXT. (EXTERNAL)” to use this feature.
•This setting will disable remote sensor reception of this unit.
•To operate the unit, point the remote control at the remote sensor of the amplifier.
To use this unit without connecting it to the amplifier, set the remote control switch to “INT. (INTERNAL)”.
This unit
Set to “EXT. (EXTERNAL)”
Remote control cable
(supplied)
Amplifier
Connecting the power cord
After completing all the connections, insert the power plug into the power outlet.
To household power outlet |
|
(AC 120 V, 60 Hz) | Power cord (supplied) |
|
NOTE
•Do not plug in the power cord until all connections have been completed.
•Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
version Basic
version Advanced
Information
Flasher input
This is used when controlling components from different rooms with a keypad or other input device. Set the remote switch to “INT. (INTERNAL)” when using a flasher input.
DVD | 12 |
|