GRemote control unitH

Symptom

Cause/Solution

Page

The set cannot be

• Aim the remote control directly at the infrared sensor window on

51

operated with the

the front of the unit.

 

remote control.

• Operate within a distance of 7 m from the remote control sensor.

51

 

• Remove any obstacles.

51

 

• Replace the batteries with new ones.

51

 

• Insert the batteries in the proper direction, checking the q and

51

 

w marks.

 

 

• Match the signal code of the remote control to the signal code of

42, 52

 

the unit.

 

 

• Check whether the remote sensor of the unit is exposed to direct

51

 

sunlight or strong light of a fluorescent lamp, 3D synchro signal of

 

 

TV. Be sure to avoid exposing the remote sensor to strong light.

 

 

• The switch on the back of the REMOTE CONTROL is on “EXT.

12

 

(EXTERNAL)”. When using this unit independently, set the switch

 

 

to “INT. (INTERNAL)”.

 

• Some functions may not be used under certain operating conditions, but this is not failure of the unit.

Read the description in this Owner’s Manual for details on correct operations.

Specifications

nn Performance

Signal format :

NTSC, PAL

Applicable discs /memory device :

(1)

BD-Video disc :

 

 

12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers

 

(2)

DVD-Video / DVD-Audio disc :

 

 

12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers /

 

 

12 cm, 2 sides, 2 layers (1 side, 1 layer)

 

 

8 cm, 1 side, 1 layer; 8 cm, 1 side, 2 layers /

 

 

8 cm, 2 sides, 2 layers (1 side, 1 layer)

 

(3)

Super Audio CD :

 

 

12 cm, 1 layer / 12 cm, 2 layer / 12 cm, Hybrid

 

(4)

Compact Disc (CD-DA) :

 

 

12 cm / 8 cm disc

 

(5)

Memory device :

 

 

USB memory device (USB 2.0)

HDMI output :

Output terminal : 19-pin HDMI terminals, 2 set

 

(Deep Colour, Dolby Digital Plus, Dolby TrueHD, DTS-HD, 3D)

Analog audio output :

2 channels output terminal : Pin jack, 1 set

 

Output level : 2 Vrms (10 kΩ)

 

2 channels output terminal : Balanced terminal, 1 set

 

Output level : 4 Vrms (10 kΩ)

version Basic

version Advanced

• The volume may differ from disc to disc. This is due to the differences in how the signals are recorded

on the disc and is not a malfunction.

• During programmed playback, it is not possible to perform random playback or to start playback from a

desired track or file.

• Some functions are prohibited on some discs.

Audio output characteristics :

(1) Frequency response

 

q BD (Linear PCM)

w DVD (Linear PCM)

e Super Audio CD r CD

:2 Hz - 22 kHz (48 kHz sampling)

:2 Hz - 44 kHz (96 kHz sampling)

:2 Hz - 88 kHz (192 kHz sampling)

:2 Hz - 22 kHz (48 kHz sampling)

:2 Hz - 44 kHz (96 kHz sampling)

:2 Hz - 88 kHz (192 kHz sampling)

:2 Hz - 40 kHz

:2 Hz - 20 kHz

Information

(2)S/N ratio : 125 dB (BD)

(3)Total harmonic distortion : 1 kHz, 0.0008 % (BD)

(4)Dynamic range : 110 dB (BD)

Digital audio output :Coaxial digital output : Pin jack, 1 set

nn General

Power supply :

AC 120 V, 60 Hz

Power consumption :

25 W

(vpage 39 “Energy Saving Mode”)

0.3

W (Energy Saving Standby)

 

0.5

W (Normal Standby)

 

14 W (Quick Start)

zz For purposes of improvement, specifications and design are subject to change without notice.

DVD

67