General Settings

Settings for system, language, parental lock, network, etc. can be made.

Basic

System

Default settings are underlined.

 

 

Set the following settings.

•Screen saver settings

•Power saving mode settings

•HDMI control function settings

•Initialize settings

•Firmware update from the Internet

•BD-Live™ download data save location settings and initialization

Setting items

Setting details

Screen Saver

On : The screensaver function activates when stop or pause status

Sets the screensaver.

continues for about three minutes.

 

Off : Does not use the screensaver.

Auto Standby

On : This setting automatically sets the power to standby if any of the

This setting automatically

following states continues for approximately 30 minutes.

sets the power to standby.

• Disc not loaded

 

• Playback stopped

 

• Stopped due to the resume function

 

Off : Does not use the auto power mode.

Energy Saving Mode

Energy Saving Standby : This is the lowest power consumption mode.

Sets the standby mode.

During standby, operations are not accepted via HDMI control.

 

STANDBY indicator status in standby mode : Red

 

Normal Standby : During standby, operations are accepted via HDMI

 

control. Power consumption is slightly higher at this time.

 

STANDBY indicator status in standby mode : Orange

 

Quick Start : Startup time is reduced but more power is consumed in this

 

mode. HDMI control operations are accepted.

 

Power indicator status in this mode : Orange

DVD

39

 

Setting items

Setting details

HDMI Control

Off : Disables the HDMI control function.

Links the unit and a device

HDMI AMP On : Links with the device connected to the HDMI AMP

connected with an HDMI

output.

cable that supports HDMI

HDMI MONITOR On : Links with the device connected to the HDMI

control.

MONITOR output.

 

• For the HDMI control function to operate, it is necessary for the unit or

 

HDMI-compatible TV connected to the unit to have an HDMI connection.

 

• Refer to “HDMI control functions” (vpage 35) for more information

 

on HDMI control functions.

 

• After the “HDMI Control” setting has been changed, always turn off the

 

power to the connected equipment and then turn it back on.

HDMI Power Off Control

On : Turns the unit’s power to standby through linkage to the TV.

Links the power of the unit

Off : Does not turn the unit’s power to standby through linkage to the TV.

and a device connected with

 

an HDMI cable that supports

 

HDMI control.

 

Reset

Cancel : Does not initialize.

All settings including audio

OK : Executes initialization.

mode and picture quality are

 

set to default settings.

 

v See overleaf

version

version Advanced

Information