Marantz ZR6001 Basic Operation, Play Back, Selecting An Input Source, Video Convert, English

BASIC OPERATION

(PLAY BACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must first select the input source on the ZR6001.

VIDEO CONVERT

When this function is activated, the video or S-video signal can be emitted from the video, S- video or component video output terminal.

To activate this function, select VIDEO CONVERT in PREFERENCE menu and set ENABLE.

Notes:

• The component video signal is emitted only from

component video output terminal.

The signal cannot be converted from the	ADJUSTING THE MAIN VOLUME
component to the video or S-video.
Notes of OSD menu:	TV	VCR1	DSS/VCR2	DVD
• The setup menu can be displayed through all	TUNER	CD	TAPE	CDR/MD

video out (COMPONENT, S-VIDEO, VIDEO).

• The setting informations (e.g. volume setting) are	DISPLAY	MEMORY	CLEAR	AMP
			AUX1
displayed through all video out when the VIDEO			TV	MAIN
	EXIT	BAND	T-MODE	MUTE VOL.
			VOL. SLEEP
CONVERT function are set ENABLE.

ENGLISH

Example : DVD

POWER

TV VCR1 DSS/VCR2 DVD

TUNER CD TAPE CDR/MD

AUX1AMP

TV			MAIN
VOL.	SLEEP	MUTE	VOL.

To select DVD, turn the INPUT FUNCTION SELECTOR knob on the front panel or simply press the DVD button on the remote.

After you have selected DVD, simply turn on the DVD player and play the DVD.

When the video equipment is connected by

component terminal, connect the monitor and

ZR6001 by the component terminal.

• This function is unavailable for the REC out

terminal.

• This function is unavailable for the still picture, fast

forward and reverse playing of the video component.

• If, while attempting to use the video convert

feature, the ZR6001 cannot synchronize with the

display device, “NO SIGNAL” appears on the

monitor, or noise is generated, this feature cannot

be used. All of these signs are caused by

equipment incompatibility; there is nothing

wrong with the ZR6001.

In such case, set VIDEO CONVERT in the

PREFERENCE menu to DISABLE. Also, connect

the video input signal to the display device via the

Note:

No setting information is displayed when the signal is emitted from the COMPONENT IN to

COMPONENT OUT.

•The setting informations (e.g. volume setting) are displayed through the S-VIDEO or VIDEO out when the VIDEO CONVERT function are set DISABLE. When the S-VIDEO and VIDEO outputs are used simultaneously, the setting informations are displayed through the S-VIDEO out only.

SELECTING THE SURROUND MODE

Example: AUTO SURROUND

OSDMENU

ENTER

Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOL /buttons on the remote.

To increase the volume, turn the VOLUME knob clockwise or press VOLbutton on the remote, to decrease the volume, turn counterclockwise or press VOLbutton on the remote.

Notes:

•The volume can be adjusted within the range of – ∞ to 18 dB, in steps of 1 dB.

•However, when the channel level is set as described on page 22, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB.

• As the input source is changed, the new input

n a m e w i l l a p p e a r m o m e n t a r i l y a n O S D

information on the video display. The input

name will also appear in the display, on the

front-panel.

• As the input is changed, the ZR6001 will

automatically switch to the digital input,

surround mode, attenuation, and night mode

s t a t u s w h i c h w e r e e n t e r e d d u r i n g t h e

configuration process for that source.

• When an audio source is selected, the last video

input used remains routed to the VCR1 & DSS/

VCR2 Outputs and Monitor Output. This

permits simultaneous viewing and listening to

MONITOR OUT terminal under VIDEO and the

S-video input signal to the display device via the

MONITOR OUT terminal under S-VIDEO.

Example:

Monitor is connected with the component.

VIDEO
or S-VIDEO	component
or component

				ENTER
			SET UP/		MENU OFF
			T.TONE
			PURE DIRECT	AUTO		DTS
				1	2	3
			NIGHT	CSII	EX/ES	VIRTUAL
S	URROUND	PURE	SIMPLE	4	5	6
	MODE	DIRECT	SETUP
			DISPLAY	MCH-ST	STEREO	7.1CH IN
	AUTO	HT-EQ	MENU	7	8	9

CLEAR MEMO A/D P.SCAN/V-OFF

0

CHANNEL/SKIP

BASS TREBLE TUNE/SEARCH

To select the surround mode during playback, press the SURROUND MODE button on the front panel or the Surround mode buttons on the remote.

(In this case the maximum volume adjustment range is “18 dB - Maximum value of channel level)

ADJUSTING THE TONE (BASS &

TREBLE) CONTROL

1 2 3

NIGHT CSII EX/ES VIRTUAL

4 5 6

DISPLAY MCH-ST STEREO 7.1CH IN

7 8 9

CLEAR MEMO A/D P.SCAN/V-OFF

0

CHANNEL/SKIP

BASS TREBLE TUNE/SEARCH

different sources.

• When a Video source is selected, the video

signal for that input will be routed to the Monitor

Monitor is connected with the video or S-video.

T-MODE RDS F.DIRECT

INPUT/DISC+ AUDIO SUB-T/ATT PTY

CH.SEL LIP.SYNC

Output jacks and will be viewable on a TV

monitor connected to the ZR6001.

If a component video input is connected to the

DVD or DSS component inputs, it will be routed

to the Component Video Output. Make certain

that your TV is set to the proper input to view the

signal.

VIDEO

or S-VIDEO

component

VIDEO

or S-VIDEO

VIDEO

or S-VIDEO

During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics.

(Using the remote control unit)

To adjust the bass effect, press BASS or BASS on the remote.

To adjust the treble effect, press TREBLE or TREBLE on the remote.

Note:

•The tone control function can work in the AUTO Surround, Stereo, Dolby PLIIx, DTS, DTS-ES, and Multi Ch. Stereo mode.

27