To access secondary functions. Press SHIFT followed by any button of your choice. Press SHIFT again to exit
[9]Numeric keys 0-9
These work the same way as on your original remote control.
[10]AV
To select an external source (SCART input).
[11]ENT
For some devices, this button in combination with the numeric keys allows you to directly select channels higher than 9. If you are in programming mode - automatic code search - you can use it to confirm the code.
[12]Menu Menu ON
[13]Exit Menu OFF
[14]OK
To confirm menu selection.
[15]Navigation keys
Up, Down, Right, Left. These allow you to navigate through the menu (TV, DVD, etc.).
[16]
Teletext ON: Start/stop Teletext/Fasttext.
Teletext OFF: Stop Teletext/Fasttext.
Teletext Hold: Stop page change in Teletext/Fasttext mode.
Teletext Mix: Allows you to mix the Teletext/Fasttext and the picture of the selected channel.
[17]REW (rewind)
In VCR or DVD mode: This button works the same way as the one on your original remote control.
IN TV mode: Coloured key (Red), videotext control or special equipment functions.
[18]FF (fast forward)
In VCR or DVD mode: This button works the same way as the one on your original remote control.
IN TV mode: Coloured key (Red), videotext control or special equipment functions.
2 | 1 |
3
| 5 |
4 |
|
6 |
|
7 | 8 |
9
11 | 10 |
12 | 13 |
14 | 15 |
| |
| 16 |
17 | 18 |
19 | 20 |
| |
21 | 22 |
TV ANYWHERE | 13 |
