Master Lock E72 Deny/Restore Access To Selected Groups, Function, Level: Master, Level: Master, Set Access Level

Deny/Restore Access To Selected Groups Function 10

Level: Master

This function allows RESTRICTED ACCESS to SELECTED USER GROUPS without erasing the group/groups from memory. Once access has been denied to a group/groups then access must be restored using this function.

ENTRIESVISUAL / AUDIO

1.
	Valid User Code
2.				#
	Function Number	1	0	*
3.
	Group
					*
4.		Mgmt.	Defined
	Select One:
	(0) Restore Access		0		*
	(1) Deny Access
			1		*
5.
	Exit
				*
	See Note

Note

Function DENIES ACCESS to ALL MEMBERS of the selected GROUP.

GGM cannot be denied access.

ENTER “#” to return to FUNCTION NUMBER (Step 2) and continue programming.

IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.

Page 14

Function 11 Set Access Level

Level: Master

ACCESS is DENIED to ALL GROUPS with access levels LOWER than the ENTERED GROUP. In order to restore access to all groups this function must be used by a manager with a security level equal to or higher than the restricting manager.

ENTRIESVISUAL / AUDIO

1.	Valid User Code
2.				#
	Function Number	1	1	*
3.
	Group Level			*
4.		User	Defined
	Exit
				*
	See Note

Note

The DEFAULT for this function is NO RESTRICTIONS.

To RESTORE access ENTER “99” in the GROUP LEVEL.

ENTER “#” to return to FUNCTION NUMBER (Step 2) and continue programming.

IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.

Page 15