Master Lock E72 Initialize Lock ID, Level: Master, Function, Time, ONLY, STEPS, below, Function, 2. Enter, 4. Enter, Day Code, UID and PIN, appropriate, 3. Enter Day

Function 03	Sample FunctionAddProgrammingG oup SchedulePag
Function Number	Function Name
Function 03	Group Schedule

Minimum Group	Level: Master
Security Level	Function schedules OPEN and CLOSE time/day for an established GROUP of
Needed To
	users. This function differs from the Basic Schedule (Func. 02), in that
Program Function	specific GROUPS can be granted access.

STEPS	ENTRIES	VISUAL / AUDIO
1. Enter your	Valid User Code	#
UID and PIN.
2. Enter	Function Number	0 3 *
Function Number.

Function Description

LED /Audio Entry

Confirmation

G= Green

Y= Yellow

R= Red

3. Enter Day	Day Code	0	8	*	Grey boxes are for
Code from list
below.	See Day Code	Mgmt. Defined			entering required
					information
4. Enter
	Group	1	2	*
appropriate
Group Number.		Mgmt. Defined
5. Enter Open	Open Time	07	00		*
Time.
	(Military)	Hours	Minutes

6.Enter Close Time.

7.Enter * to exit or to continue programming, enter # and return to Function Number. (Step 2)

Close Time		17	00	*	White boxes are for
					entering variable
(Military)		Hours	Minutes		information.
Exit			*
See Note
Day Code	Must be entered as a 2 digit code.
01-07	Individual Days (Ex: Monday = 01)
08	Weekdays - Monday through Friday				Day Code
09	Weekends - Saturday & Sunday

10Even Weekdays - Tuesday & Thursday

11Odd Weekdays - Monday, Wednesday & Friday

12Override Pre-Programmed Holidays

13All Days

	Note
Note	To DELETE ALL GROUP SCHEDULES, enter “0” in place of the DAY CODE then EXIT “*”.
	For MANAGEMENT GROUPS (02-09) Group Schedule CANNOT be employed.
Information
	For USER GROUPS (10-99)Group Schedule CAN be employed.
	ENTER “#” to RETURN to FUNCTION NUMBER and continue programming.
	IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
	Page vii

Initialize Lock ID

Level: Master

The LOCK ID INITIALIZATION process can be implemented ONLY using the FACTORY CODE. This occurs when:

•The lock is first installed

•After the lock has been reset. (See page v.)

ENTRIESVISUAL / AUDIO

1.	Factory Code
			9991234	#
2.
	Lock ID
				#
		User Defined 6 Digits

Note

The default LOCK IDENTIFICATION NUMBER for this function is 000001.

Use “0” to indicate blanks. (Ex. Room 321=321000 or 000321).

We recommend that each lock be given a unique ID Number.

In order to add the ID Number later, the lock must be fully reset.

IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.

Page 1