Part Name | Descriptive Picture | How To Do |
|
| 1.Disconnect power supply to unit. |
|
| 2.Remove Top Cover. |
|
| 3.Remove Console. |
|
| 4.Remove Front Panel. |
|
| 5.Remove Console Back Cover. |
Drum Re- |
| 6.Remove Front Bulkhead. |
| 7.Remove belt from Idler Pulley. | |
moval |
| |
| 8.Grasp the Drum with one hand | |
|
| |
|
| and the belt with the other. Lift |
|
| the Drum and slide out the front. |
|
| Carefully spread the cabinet as |
|
| needed to gain additional |
|
| clearance. |
|
|
|
Rear Roller |
| 1.Disconnect power supply to unit. |
| 2.Remove Rear Bulkhead. | |
Removal |
| 3.Remove Roller Keeper and nut. |
|
|
|
|
| 1.Disconnect power supply to unit. |
|
| 2.Remove Top Cover. |
|
| 3.Remove Console. |
|
| 4.Remove Front Panel. |
|
| 5.Remove Console Back Cover. |
|
| 6.Remove Belt from Idler Pulley. |
|
| 7.Remove Drum. |
Motor/Blow- |
| 8.Remove the two screws securing |
er |
| the Blower Intake Panel to the |
| Blower Housing. Remove Blower | |
Assembly |
| |
| Intake panel. | |
Removal |
| |
| 9.Removed the screw at the | |
(1) |
| |
| bottom of the blower housing. | |
|
| 10.Remove the blower attachment |
|
| screw under the Thermistor. |
|
| 11.Remove two screws attaching |
|
| the motor bracket to the base. |
|
| 12.Disconnect the Motor wire |
|
| harness and the two wires to the |
|
| belt switch. |
