Rack Dry
INSTALLING THE DRYING RACK
1.Open dryer door.
2.Position drying rack in tumbler, placing the rear legs in the two recessed areas of the dryer’s back wall.
3.Place the front lip of the drying rack on top of the lint filter.
4.Place items to be dried on the rack, leaving space between them so air can reach all surfaces.
5.Close dryer door.
6.Use the Time Dry cycle. Select time according to moisture and weight of the items. Start dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS | SUGGESTED TEMP. SETTINGS | |
|
| |
Washable sweaters (block to | Heat (Low/Extra Low) | |
shape and lay flat on rack) | ||
| ||
|
| |
Stuffed toys (cotton or | Heat (Low/Extra Low) | |
polyester fiberfilled) | ||
| ||
|
| |
Stuffed toys (foam or | Air Fluff | |
| ||
|
| |
Foam rubber pillows | Air Fluff | |
|
| |
Sneakers | Fluff or Heat | |
|
|
WARNING – Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and lead to a fire hazard.
