Re-install the PCB | Maytag MFI2568AEW manual

Re-install the PCB:

1.Installation is the reverse order of removal

2.Tuck the right hand side of the PCB (the one you marked, right ?) into the slot on the right hand side of the white plastic tub. (Fig 20)

Fig. 20

3.GENTLY press the left side of the PCB into the top and bottom clips till they snap closed, securing the PCB in place. (Figs. 21 & 22)

Fig. 21

Fig. 22

4.Re-attach the wire connectors to the PCB – they should naturally fall back into the proper place to connect back, and match your markings drawings you made when you took them off. Push the wires back into the chases alongside the PCB. (Fig 23)

Fig. 23

Page 15 of 19

Use at your Own Risk

Maytag MFI2568AEW manual Re-install the PCB

Models: MFI2568AEW

Re-install the PCB:

© 2007 by Stephen Beck V1.0