7. Have your helper hold the frame while you plug the small wire connector back into the PCB. (Fig 26)
View looking down from the top
of the ice/water dispenser
Power to flapper door and water dispenser
© 2007 Stephen Beck
Fig. 26
8.
9.Replace the 2 screws.
10.Replace the drip tray.
11.Plug the fridge back in.
12.Check the operation of the water dispenser and the ice dispenser.
13.If everything checks out, push the fridge back into place.
I hope this document has proven a light and interesting read, and has possibly helped you better understand how your fridge operates (or fails to do so).
As any of you who have been exposed to Boy Scouts will know, one should always seek to “Do a good turn”. Here’s one of mine. Now you go out and do something helpful for someone else. And if everyone did that, it will be a nicer place to live.
© 2007 by Stephen Beck V1.0 | Page 19 of 19 | Use at your Own Risk |
