8.Have your helper hold the frame while you unplug the small wire connector (Fig 2) from the PCB. This will stop the power from going to the door flapper and ice dispenser.
View looking down from the top
of the ice/water dispenser
Power to flapper door and water dispenser
© 2007 Stephen Beck
Fig. 2
9.
10.Replace the 2 screws to keep it from popping off.
11.Replace the drip tray
12.Plug the fridge back in. If the ice door flapper is in the open position, stick a CLEAN (white preferred, color choice your decision) sock into the opening to prevent cold air from escaping.
© 2007 by Stephen Beck V1.0 | Page 6 of 19 | Use at your Own Risk |
