Maytag SL-3 Cleaning The Dispensers, Removing the Chlorine Bleach Dispenser

CLEANING THE DISPENSERS
			laundry additive build-up. For easy clean-up of the
The dispensers may need to be cleaned periodically due to
dispenser, follow the directions for the corresponding dispenser.
Removing the Chlorine Bleach Dispenser			Replacing the Chlorine Bleach Dispenser
1. Grasp the corner lip of the chlorine bleach dispenser.			1. Grasp the overflow grate so the word “CAUTION”
	Lift the dispenser up and tip it to the right to avoid		can be read. Place it in the dispensing compartment.
	hitting the washer frame. (Illustration #1)		(Illustration #4)
2. Under the chlorine bleach dispenser in the dispensing			2. Place the gray siphon cap over the stand pipe in the
	compartment is an overflow grate. Grasp the		chlorine bleach dispenser. It should fall into place.
	overflow grate by the word “CAUTION” and pull it		(Illustration #5)
	up and out of the dispensing compartment.		3. Grasp the corner lip of the chlorine bleach dispenser.
	(Illustration #2)		Tilt it slightly to the right and insert it back into the
3. Take the bleach dispenser and the overflow grate to			dispenser compartment. (Illustration #6)
	the sink. Be careful, there may be chlorine bleach left
	in the dispenser. Lift the gray siphon cap out of the
	chlorine bleach dispenser. (Illustration #3)
4. Run warm water over the dispenser, gray siphon cap
	and overflow grate to remove any build-up. A soft
	cloth may be used to remove excess residue.
#1	#3
			#2

P
UC
	3/4	FILL
		X
P		AM
CU	2/1

#4

#5

#6

NOTE: Maytag does not recommend placing the plastic dispenser parts in the dishwasher. If laundry additives were on the parts when washed in the dishwasher, they may cause over-sudsing in the dishwasher.

8