Maytag SL-3 Using The Dryer Controls, IntelliDry REGULAR, IntelliDry EASY CARE/PERM PRESS, Step

Models: SL-3

1 72
Download 72 pages 53.36 Kb
Page 13
Image 13
USING THE DRYER CONTROLS

USING THE DRYER CONTROLS

Step 1

SELECT CYCLE

IntelliDry® REGULAR

IntelliDry® REGULAR automatically senses the moisture in the load and shuts off when the selected dryness level is reached.This cycle is designed for loads such as towels, underwear, t-shirts, jeans, etc. Set the control to the desired dryness level (MORE DRY – LESS DRY).The triangle symbol ▲ between MORE DRY and LESS DRY is the initial preferred setting for the majority of loads.

IntelliDry® EASY CARE/PERM PRESS

IntelliDry® EASY CARE/PERM PRESS automatically senses the moisture in the load and shuts off when the selected dryness level is reached.This cycle minimizes the wrinkling of man-made fabrics (acrylic, nylon, polyester or blends) with an extended cool-down; tumbling the load in unheated air at the end of the cycle. Set the control to the desired dryness level (MORE DRY – LESS DRY).The triangle symbol ▲ between MORE DRY and LESS DRY is the initial preferred setting for the majority of loads.

TIME DRY/AIR FLUFF

TIME DRY/AIR FLUFF may be selected for any load if the IntelliDry® sensor system is not used. Set the control to the desired number of minutes.

DAMP DRY

DAMP DRY is designed to “partially” dry items. It provides approximately 20 minutes of heated tumbling and 5 minutes of cool-down tumbling without heat.

WRINKLE RELEASE

WRINKLE RELEASE will release wrinkles from items that are clean and dry but slightly wrinkled, such as from a crowded closet, suitcase or from sitting in the dryer too long after the end of the cycle. It provides 10 minutes of heated tumbling and 5 minutes of cool-down tumbling without heat.

NOTE: The dial can be turned in either direction to select a cycle. Once started, the dial will not advance at a specific rate during the IntelliDry® cycles. At first, the dial may not advance at all.Toward the end of the cycle, (when the load begins to dry) the dial will advance at a more regular rate and much more quickly.This is normal operation.

12

Page 13
Image 13
Maytag SL-3 Using The Dryer Controls, IntelliDry REGULAR, IntelliDry EASY CARE/PERM PRESS, Time Dry/Air Fluff, Damp Dry