Maytag SL-3 Replacing the Chlorine Bleach Grate, Cleaning The Dispensers

CLEANING THE DISPENSERS

Removing the Chlorine Bleach Grate The gray siphon cap for chlorine bleach has a grate covering the dispensing compartment.This grate helps prevent items from falling into the bleach dispenser by accident.The grate is detachable for easy clean-up.

1.When the chlorine bleach compartment is empty, lift the gray siphon cap out of the chlorine bleach compartment. (Illustration #1).

2. Run water over the entire siphon cap and grate to wash off any excess chlorine bleach.

3. Look at the backside of the siphon cap. Using your thumb, press the bottom notch up and outward (Illustration #2).The grate should come out of the hole (Illustration #3).

4. Take the pieces to the sink for cleaning.

Replacing the Chlorine Bleach Grate

1. Place the top two notches in the top of the hole.

2. Using your thumb, press the bottom notch up and outward (Illustration #4).

3. Replace the siphon tube back into the chlorine bleach dispenser (Illustration #5).

#1
P
CU		3/4	ILLF
P			AXM
CU	1/2

#4

#2
			P
			CU	2/1
#5
P
UC
	3/4	FILL
			AXM
CUP
	1/2

#3

UPC

2/1

9