How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks and popping sounds.

The Self-Cleaning cycle uses very high temperatures, burning soil to a powdery ash.

The oven is preset for a 3 hour clean cycle; however, the time can be changed. Suggested clean times are 2 hours for light soil and between 3 hours and 4 hours for average to heavy soil.

Once the oven has completely cooled, remove ash with a damp cloth. To avoid breaking the glass, do not apply a cool damp cloth to the inner door glass before it has completely cooled.

The oven light will not work during the Self-Cleaning cycle.

When “LOCK” shows in the display, the door cannot be opened. To avoid damage to the door, do not force the door open when “LOCK” is displayed.

If an oven door is left open, “Door Open? Clean Canceled” will appear in the display and a signal will beep. Close the oven door and press SELF CLEAN.

To Self-Clean:

1.Close the oven door.

2.Press SELF CLEAN.

“PRESS (+) FOR UPPER OVEN” will appear in the upper oven text area and “PRESS (-) FOR LOWER OVEN” will appear in the lower oven text area

3.Press the Temp/Time “+” or “-” pads to select the desired oven.

“REMOVE RACKS” will scroll in the selected oven text area followed by “SELECT OPTION.” In the other text area, “PRESS + or - KEY” will scroll from left to right.

4.Choose the Standard Clean setting by pressing the Temp/ Time “+” or “-” pads until “STANDARD CLEAN” and “PUSH START” scroll in the displays.

5.Press START.

“Set clean time” will scroll in the displays.

6.Press the Temp/Time “+” or “-” pads to adjust the clean time.

7.Press START.

“UNLOCK IN XXX” will scroll in the upper or lower text area (depending on oven selection). “LOCKING” will scroll until the door is locked.

After the door is lock, “CLEAN UPPER” or “CLEAN LOWER” will scroll in the selected oven text area until the clean cycle is finished.

When the self-clean cycle ends:

“CLN COMPLETE will scroll in the selected oven text area. “OVEN COOLING” will scroll in the display until the oven temperature falls below 500°F (260°C).

“UNLOCKING” will be displayed until the oven door unlocks and the lock icon turns off.

To Delay Start Self-Clean:

1.Press Delay Start.

“PRESS (+) FOR UPPER OVEN” will appear in the upper text area, and “PRESS (-) FOR LOWER OVEN” will appear in the lower text area.

2.Press the Temp/Time “+” or “-” pads to select the desired oven.

“--:--” will be displayed, and “Set starting time. Push START” will scroll from right to left in the selected oven text area for

2 minutes or until the Temp/Time “+” or “-” pads are pressed again.

3.Press the Temp/Time “+” or “-” pads until the desired time is reached.

“Select cooking/cleaning mode” will scroll in the selected oven text area for 2 minutes or until a cleaning cycle is selected.

4.Press SELF CLEAN.

“REMOVE RACKS” will scroll in the selected oven text area for 5 seconds, followed by “SELECT OPTION.” In the other text area, “PRESS + or - KEY” will scroll from left to right.

5.Press the Temp/Time “+” or “-” pads until “Standard Clean” is displayed.

“Push START” will scroll in the selected oven text area.

6.Press the Temp/Time “+” or “-” pads to select the desired cleaning level. The desired clean level and “PUSH START” will scroll in the displays.

7.Press START.

The cleaning cycle will begin, and the name will scroll in the upper text area.

“UNLOCK IN XXX” will scroll in the upper or lower text area (depending on oven selection). After 5 seconds, “LOCKING” will scroll until the door is locked.

After the door is lock, “CLEAN UPPER” or “CLEAN LOWER” will scroll in the displays until the clean cycle is finished.

When the self-clean cycle ends:

“CLN COMPLETE will scroll in the selected oven text area. After 5 seconds, “OVEN COOLING” will scroll in the display until the oven temperature falls below 500°F (260°C).

“UNLOCKING” will be displayed until the oven door unlocks and the lock icon turns off.

18

Page 18
Image 18
Maytag W10291449A, MGT8885XS How the Cycle Works, To Self-Clean, To Delay Start Self-Clean, When the self-clean cycle ends