Maytag W10385091A - SP Cycle Guide - Timed And Steam Cycles, Selecting the Drying Temperature

CYCLE GUIDE — TIMED AND STEAM CYCLES

Settings and options shown in bold are default settings for that cycle.

Not all features and cycles are available on all models. Not all settings and options are available on each cycle.

Steam cycles (on some models) are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Steam model Non-Steam model

Adjusting drying time on Timed Cycles

When you select a Timed Cycle, the default time appears in the display. Use the More Time/Less Time buttons to increase or decrease the time in 1 minute increments. Press and

hold to change the time in 5 minute increments.

The maximum dry time is 100 minutes.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use a no heat (Air Dry) setting for foam, rubber, plastic, or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

Using Air Dry

Use the Air Dry temperature setting with Timed Cycles for items that require drying without heat such as rubber, plastic, and heat-sensitive fabrics. This chart shows examples of items that can be dried using Air Dry.

Type of Load	Est. Time*
	(Minutes)
Foam rubber – pillows, padded bras,	20–30
stuffed toys
Plastic – shower curtains, tablecloths	20–30
Rubber-backed rugs	40–50
Olefin, polypropylene, sheer nylon	10–20

*Reset time to complete drying, if needed. When using Air Dry:

•Check that coverings are securely stitched.

•Shake and fluff pillows by hand periodically during the cycle.

•Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Air Dry setting is only available with Timed Cycles.

	Cycle:	Drying	Default	Available
Items to dry:		Temperature:	Time:	Options:	Cycle Details:
Any load	Timed Dry	High	40	Wrinkle Prevent™	Use to dry items to a damp level for items that do
NOTE: Select Air		Medium			not require an entire drying cycle. Select a drying
Dry to dry foam,		Low			temperature based on the type of fabrics in your
rubber, plastic,		Extra Low			load. If you are unsure of the temperature to select
or heat-sensitive		Air Dry			for a load, select the lower setting rather than the
fabrics.					higher setting.
Small loads and	Rapid Dry	High	27	Wrinkle Prevent™	For small loads of 3-4 items.
sportswear	(Non-Steam	Medium
	models only)	Low
		Extra Low
		Air Dry
Mixed Loads	Freshen Up	High	20	Wrinkle Prevent™	Use to reduce wrinkles, including from loads left in
	(Non-Steam	Medium			the dryer too long. Cycle run time may be manually
	models only)	Low			adjusted, and Temperature is selectable.
		Extra Low
		Air Dry
Shirts, blouses,	Custom	Medium	15	Wrinkle Prevent™	Use to reduce odors and light wrinkles.
and slacks	Refresh				NOTE: Do not add dryer sheets.
	(Steam
	models only)
Mixed Loads	Auto Refresh	High	20	Wrinkle Prevent™	Use to reduce wrinkles, including from loads left in
	(Steam	Medium			the dryer too long. Cycle run time may be manually
	models only)				adjusted, and Temperature is selectable.
					NOTE: Do not add dryer sheets.

9