Toshiba 190F Department Code, Direct Dialing, Directory Search Dialing, Directory Sheet, File

Department Code	This operation require the user to input a preset 4-digit Department Code before
	transmission. The Department Name of selected Department Code is printed on the Header
	of each page sent, Cover Sheet, Comm. Journal and Individual Transmission Journal.
Direct Dialing	The method of dialing where you enter the entire telephone number or email address through
	the QWERTY keyboard.
Directory Search Dialing	Allows you to dial a full telephone number or email address by searching the station's name
	entered in the Address Book.
Directory Sheet	The list that contains the station names that are programmed into your machine.
DTMF (Dual Tone Multi-	Dialing method that sends a different set of frequencies for each digit of the telephone
Frequency)	keypad. Commonly refers to touch tone dialing.
Duplex Scan	The ability to scan both sides of 2-sided original(s) for transmission.
ECM (Error Correction	The ability to correct transmission errors as detected during the transmitting phone call.
Mode)
End Receiving Station	In a relay network, the final station designated to receive the document.
Energy-Saver Mode	Saves energy by consuming less power than when in standby mode by turning off the fuser
	unit after the specified time.
Fax Forward	The ability to forward all incoming faxes to the specified station registered in the Address
	Book.
Fax Parameter List	The list that contains the home FAX parameters settings that you have programmed into your
	machine.
FAX/TEL Auto Switching	The ability to share a single telephone line for both fax and voice usage.
File	A task that has been stored into the memory of your machine. Examples are deferred
	transactions.
Fixed Print Reduction	The method that allows you to determine one reduction rate, such as 75%, for all incoming
	documents.
Function	The control panel key that will be utilized to begin an operation or configuration of a feature.
G3 Mode (Group 3)	Refers to the standards and transmission capabilities of the current generation of facsimile
	machines.
Group Dialing	The ability to program many telephone numbers and/or email addresses into a single station
	so that many locations can be dialed in sequence utilizing a single keystroke.
Handshaking	The exchange of a group of control signals that communicate between the transmitter and
	receiver. These signals determine the condition at which communication can occur.
Header	A row of information that is transmitted by the sending machine and printed on the top of
	each page by the receiving machine. This identifies the transmitting machine and information
	about the transmission, such as time and date.

Continued on the next page... 147

Appendix