Toshiba 190F manual 114, Auto

Setting Your Machine

Fax Parameters

No.	Parameter	Setting	Setting		Comments
		Number
039	PIN CODE ACCESS	*1	None	Selecting the access method (Prefix or Suffix) to dial a
				number with PIN Code.
		2	Suffix
		3	Prefix
053	SUB ADDRESS		(----)	Setting a password (up to 20 digits) for secured sub-
	PASSWORD			address communication.
054	FAX FORWARD	*1	Invalid	Selecting whether the machine performs Fax
				Forwarding to the specified destination.
		2	Valid
056	COVER SHEET	*1	Off	Setting the home position of the Cover Sheet
				parameter in the Select Mode. (See page 66)
		2	On
058	LANGUAGE	*1	A-ENGLISH	Selects the default message language for the display.
		2	C-FRENCH
		3	SPANISH
077	DEPARTMENT CODE	*1	Invalid	Selecting whether the machine performs the
				Department Code operation.
		2	Valid
082	QUICK MEMORY XMT	1	Invalid	Selecting whether the machine performs Quick
				Memory Transmission.
		*2	Valid
				Invalid : Stores all documents into memory first
					before dialing the telephone number.
				Valid : Starts dialing the telephone number
					immediately after storing the first page.
				(This feature is not available when the Fax Parameter
				No. 133 (Job Build) is set to "2: On". )
088	LINE SELECTION	*1	Auto	Selecting the transmitting telephone line when the
				optional G3 Communication Port Kit is installed.
		2	Line-1
				Auto	: Selects the available telephone line for
		3	Line-2
					transmission automatically.
				Line-1 : Selects Line-1 as the only transmitting
					telephone line.
				Line-2 : Selects Line-2 as the only transmitting
					telephone line.
				Note: Regardless of the setting selection above, the unit
					will answer and receive on both telephone lines.
095	DUPLEX PRINT	*1	Invalid	Selecting whether the machine performs duplex print
				when receiving the document via G3 Fax or Internet Fax.
		2	Valid
097	SPECIAL TRAY	*1	None	Select a Special Tray that will not be used for printing
	No.1 - 2			received faxes (Tray 1 or 2). One Tray must always be
		2	Tray 1
				available for receiving faxes. This setting is available
		3	Tray 2
				when the optional 2nd Paper Feed Module is installed.
099	MEMORY SIZE	-	-	Displays the amount of memory size.
	(SD Memory Card)
118	FAX FUNCTION	1	Invalid	Setting the number of digits required to determine the
	DETECT			entered number is a Fax Telephone number.
		2	4-Digit
				Upon detecting the specified number of digits, the
		3	5-Digit
				machine will automatically switch to the FAX Mode
		*4	6-Digit
				when it is in the Copier Mode.
		5	7-Digit
		6	8-Digit

114