Toshiba 190F manual 140, Remote Update is set to Valid

Problem Solving

Information Code

Info.	Meaning	Possible Action	Page
Code
730	Cannot retrieve the Journal nor program the Internet	Check that the Fax Parameter No. 158 (PC	116
	Parameters and the Auto Dialer remotely via email	Remote Update) is set to “Valid”.
	from a PC.
731	The dialer buffer for manual dialing was full (50	Request the sender to resend the Relay	--
	stations) when the Relay Transmission Request was	Transmission Request after the reserved
	received.	communication is finished.
800/814/	Machine was requested to relay a document or	Check with the other party.	--
816/825	Confidential Communication but has no capability.
826	Received Sub-address is not registered in the Auto	Check the Auto Dialer.	--
	Dialer (One-Touch/ABBR. Dialing).	Check the remote station.
870	Memory overflow occurred while storing documents	1. Transmit documents without storing them	44
	into memory for transmission.	into memory first. Use Direct Transmission
		when using G3 Fax Communication.	144
		2. Install Optional Memory (SD Memory
		Card).
871	Overflow of the file management area occurred.	Wait until the machine finishes printing or	--
		sending the documents.

NOTE

140

1.After identifying the problem and taking the recommended action, if the Information Codes keep reoccuring or Information Codes that appear on your machine but are not listed above, please contact your service representative.