Toshiba 190F manual 112, Fax Parameter Table, Setting Comments, Off, Always

Setting Your Machine

Fax Parameters

Fax Parameter Table

No.	Parameter	Setting	Setting		Comments
		Number
001	CONTRAST	1	Lightest	Setting the home position for the CONTRAST.
	(HOME)
		2	Lighter
		*3	Normal
		4	Darker
		5	Darkest
002	RESOLUTION	1	Standard	Setting the home position for the RESOLUTION.
	(HOME)
		*2	Fine
		3	S-Fine
		4	600dpi
		5	Halftone
			(Fine)
		6	Halftone
			(S-Fine)
		7	Halftone
			(600dpi)
004	STAMP	*1	Off	Setting the home position for the STAMP.
	(HOME)			To select the stamp function when document is stored
		2	On
				in memory, see Fax Parameter No. 28.
005	MEMORY	1	Off	Setting the home position for the MEMORY.
	(HOME)
		*2	On
006	DIALING METHOD	1	Pulse	Selecting the dialing method.
		*2	Tone
007	HEADER PRINT	*1	Inside	Selecting the printing position of the header.
				Inside : Inside TX copy area.
		2	Outside
				Outside : Outside TX copy area.
		3	No print
				No print : Header is not printed.
008	HEADER FORMAT	*1	Logo, ID No.	Selecting the header format.
		2	From To
009	RCV'D TIME PRINT	*1	Invalid	Selecting whether the machine prints the received date
				& time, remote ID, percentage of reduction and page
		2	Valid
				number on the bottom of each received document.
010	KEY/BUZZER VOLUME	1	Off	Selecting the key touch beep sound.
		*2	Soft
		3	Loud
012	COMM. JOURNAL	1	Off	Selecting the home position of printout mode for
				COMM. Journal Off/Always/Inc. only.
		2	Always
				Off	: Does not print
		*3	Inc. Only
				Always	: Always prints
				Inc. Only : Prints only when communication has
					failed.
013	AUTO JOURNAL PRINT	1	Invalid	Selecting whether the machine prints the journal
				automatically after every 200 transactions.
		*2	Valid
014	FILE ACCEPTANCE	*1	Invalid	Selecting whether the machine prints the file
	REPORT			acceptance journal.
		2	Valid
				If you set this parameter to valid, a journal will be
				printed out after a new job is stored in the memory.
017	RECEIVE MODE	1	Manual	Setting the reception mode to automatic or manual.
		*2	Auto

112