Toshiba 190F Receiving Documents, Automatic Reception, Manual Reception, Print Reduction Setting

Facsimile Features

Receiving Documents

Automatic Reception

Transmit Documents are received automatically.

Receive

Manual Reception

Transmit

To receive documents manually, change the Fax Parameter No. 17 (Receive Mode) to "Manual" (See page 112).

Receive

1

Rings

Substitute Memory Reception

If the recording paper runs out, jams or if the toner runs out during reception, the machine automatically starts receiving documents into its image data memory. Stored documents will be printed automatically after replenishing the recording paper, toner or clearing the jam. (See Notes 1, 2 and 3)

1

MESSAGE IN MEMORY 03%

When the machine completes the memory reception and there is no recording paper or toner, this error message appears on the display.

Print Reduction Setting

Transmitted Document

Oversized Document

Received Document

Reduced to fit

the loaded paper size (See Note 4)

Automatic Reduction

Based on the document length, your machine will automatically calculate the suitable reduction ratio (70% to 100%).

Set Parameter No. 24 (Print Reduction) to "Auto". (See page 113)

Fixed Reduction

Pre-determine the reduction ratio from 70% to 100% in 1% increments.

a)Set Parameter No. 24 (Print Reduction) to "Fixed".

b)Set Parameter No. 25 (Reduction Ratio). (See page 113)

NOTE

1.If the memory overflows, the machine will stop receiving and release the communication line. The document(s) stored in the memory up to that moment will be printed out.

2.If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 22 to "Invalid". (See page 113)

3.The machine cannot print the received documents from the Sheet Bypass.

50